ST-LINK V2 STM8/STM32 emulator programmer stlink downloader line burner debugger

Product Description: 

Mini ST-LINK / V2, the function is the same as the official, supports automatic upgrade, supports the full range of STM32 SWD and the full range of STM8 

SWIM download and debugging.
 
Eight highlights of ST-LINK V2 in our store:

1. Use the aluminum alloy U disk shell to install the internal motherboard, which is convenient to carry, safe, and reliable.
2. The interface definition is directly marked on the shell, which is clear at a glance, convenient, and practical.
3. 5V and 3.3V are provided at the same time, which is convenient for you to connect 5V and 3.3V target boards
4. The shell characters use laser, laser engraving, will not fall off! Clear and clear.
5. The internal motherboard has a 500MA self-recovery fuse, which can completely protect your expensive computer motherboard.
6. Red and blue dual-color LED indicator, which is convenient for you to observe the working status of ST-LINK V2 from time to time.
7. Distribute 4 DuPont lines, so you can easily deal with different target board line sequences.
8. The outer packaging uses anti-static bags, and the automatic sealing machine seals the packaging, which is safe and reliable, not afraid of static electricity, not afraid of water. 

Functions and features: 

1. Supports a full range of STM32 SWD interface debugging, 4-wire interface is simple (including power supply), fast, stable work; interface definition outside
2. Directly mark! No need to read the instructions.
3. Support the full range of STM8 SWIM download and debug (common development environments such as IAR, STVD, etc. are supported); the supported software versions are as follows:

    ① ST-LINK Utility 2.0 and above

    ② STVD 4.2.1 and above
 
    ③ STVP 3.2.3 and above

    ④ IAR EWARM V6.20 and above
 
    ⑤ IAR EWSTM8 V1.30 and above

    ⑥ KEIL RVMDK V4.21 and above

4. Support automatic firmware upgrade to ensure the follow-up support of ST products. The firmware has been upgraded to the latest V2.J17.S4 when leaving the factory;
 
5. Increase the 5V power output, and the output I/O ports are protected, so you are not afraid of damage to ST-LINK V2 caused by operating errors!
 
6. The interface uses pure copper gold-plated 2.54 pitch simple horn socket, equipped with 20CM DuPont line, which can deal with different target board line sequences and flexible wiring;
 
7. Use U disk aluminum alloy shell to protect the motherboard, easy to carry, not afraid of static electricity, not afraid of falling and bumping.

Shipping list:

1. 1x ST-LINK V2 (sealed in an anti-static bag)
2. 20CM debugging DuPont wire 4 (anti-static bag sealed packaging) random color