PIC ICD2 Universal Programming Adapter/Socket | Programmer Board | PICKit2 PICKIT3
Original price was: ₨500.00.₨450.00Current price is: ₨450.00.
Overview:
- The PICKIT 2/3 Universal Programming adapter is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.
- PICKIT 2/3 Universal Programming adapter
- Very easy to use
- Low cost but highly effective in PIC development
Description:
The PICKIT 2/3 Universal Programming adapter is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.
Instructions for use:
Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P:
(A) This flag line short-circuit cap on the A position.
The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line
(B), shorting cap on the B position.
The ICD2, KIT2, KIT3 crystal head, or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions)
The seat supports the following programming microcontroller:
PIC16/18XX 40PIN Series devices (except 16F59)
PIC16/18XX 28PIN Series devices (except 16F57)
PIC16/18XX 18PIN Series devices
The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX)
Features:
- Prime High-quality dropship good looks
- Reasonable transport forged
- For Arduino building
Package Included:
1 x PIC ICD2 Programming Adapter PICKIt 2 PICKIT 3 Universal Programmer Seat Board
You must be logged in to post a review.
Related products
AVR ISP Downloader / Download Line / Programmer Support Studio 4/5/6/7 / Compatible with Original STK500
Programmer Introduction:
This programmer independently develops hardware and firmware, which perfectly supports the newly developed latest AVR studio 7; AVR studio 6.2, and V5.0 integrated development environment. It also supports the ultimate version of AVR Studio V4.19 original architecture. The AVR Studio4 series is the version most familiar to engineers who have used AVR chips in the early days. The supported chips are more comprehensive, but the update was officially stopped after V4.19 was launched in September 2011.
CC-DEBUGGER Debugger and Programmer for RF System-on-Chips TI Supported Software
- CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips
- Used with IAR Embedded Workbench
- CC Debugger supports all RF System-on-Chips except: CC1010, CC430 (which uses the MSP-FET430UIF)
- CC Debugger can also be used for controlling selected devices from SmartRF Studio
Reviews
There are no reviews yet.