The 5532 is a dual high-performance low noise op-amp. Compared to most of the standard operational amplifiers, such as the 1458, it shows better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. This makes the device especially suitable for application in high-quality and professional audio equipment, instrumentation and control circuits, and telephone channel amplifiers. The op amp is internally compensated for gains equal to one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has guaranteed noise voltage specifications.
NE5532
NE5532 Dual Low-Noise High-Speed Audio Operational Amplifier DIP8
Features:
Small-Signal Bandwidth: 10 MHz
Output Drive Capability: 600 Ω, 10 VRMS
Input Noise Voltage: 5.0 nV/(Hz)^0.5 (Typical)
DC Voltage Gain: 50000
AC Voltage Gain: 2200 at 10 kHz
Power Bandwidth: 140 kHz
Slew Rate: 9.0 V/µs
Large Supply Voltage Range: ±3.0 to ±20 V
Compensated for Unity Gain
Applications:
Instrumentation and Control Circuits
Telephone Channel Amplifiers
You must be logged in to post a review.
Related products
2SA966
2SD1047
LM124J
General Purpose Op Amps:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of both through hole and SMT packages. Many of the devices in the LM family of op-amps offer low power consumption and are able to operate with single supplies with input common mode voltages that includes ground.
LM3080N
LM348N
Features:
- 741 op amp operating characteristics
- Low supply current drain: 0.6 mA/Amplifier
- Class AB output stage — no crossover distortion
- Pin compatible with the LM124
- Low input offset voltage: 1 mV
- Low input offset current: 4 nA
- Low input bias current: 30 nA
- Gain bandwidth product
- LM148 (unity gain): 1.0 MHz
- LM149 (AV ≥ 5): 4 MHz
- High degree of isolation between amplifiers: 120 dB
- Overload protection for inputs and outputs
LT1012
- OP-07 Type Performance:
- at 1/8th of OP-07’s Supply Current
- at 1/20th of OP-07’s Bias and Offset Currents
- Guaranteed Offset Voltage: 25µV Max
- Guaranteed Bias Current: 100pA Max
- Guaranteed Drift: 0.6µV/°C Max
- Low Noise, 0.1Hz to 10Hz: 0.5µVP-P
- Guaranteed Low Supply Current: 500µA Max
- Guaranteed CMRR: 114dB Min
- Guaranteed PSRR: 114dB Min
- Guaranteed Operation at ±1.2V Supplies
Reviews
There are no reviews yet.