PIC12F617
Features:
- Self Read-Write Flash Program Memory
- Internal 4/8MHz oscillator
- Comparator with hysterisis (user configurable)
- Mid-Range core with 35 Instruction, 8 Stack Levels
- 25mA Source/Sink current I/O
- Two 8-bit Timer (TMR0/TMR2)
Description
Device Overview
Additional Features
-
- Self Read-Write Flash Program Memory
- Internal 4/8MHz oscillator
- Comparator with hysterisis (user configurable)
- Mid-Range core with 35 Instruction, 8 Stack Levels
- 25mA Source/Sink current I/O
- Two 8-bit Timer (TMR0/TMR2)
- One 16-bit Timer (TMR1)
- Watchdog Timer (WDT)
- Enhanced Power-On/Off-Reset
- Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
- Enhanced Capture Compare PWM (Pulse Width Modulation)
- Wide Operating Voltage (2.0V – 5.5V)
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 3.5
CPU Speed (MIPS/DMIPS): 5
SRAM Bytes: 128
Capture/Compare/PWM Peripherals: 1 ECCP,
Timers: 2 x 8-bit, 1 x 16-bit
ADC Input: 4 ch, 10-bit
Number of Comparators: 1
Temperature Range (C): -40 to 125
Operating Voltage Range (V): 2 to 5.5
Pin Count: 8
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
AT89C2051
Low-voltage, high-performance CMOS 8-bit microcomputer with 2KB of flash programmable and erasable read-only memory. The device is manufactured using Microchip high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. This versatile 8-bit CPU with flash provides a highly flexible and cost-effective solution for many embedded control applications.
ATmega32U4
Microchip Technology ATmega32U4 8-bit Microcontroller (MCU) with USB Controller is a low-power, AVR® RISC-based device featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM, USB 2.0 full-speed/low speed device module, 12-channel, 10-bit analog-to-digital-converter, and JTAG interface for on-chip-debug. This Microchip device achieves up to 16 MIPS throughput at 16MHz and 2.7 to 5.5V operation. By executing powerful instructions in a single clock cycle, Microchip ATmega32U4 MCU achieves throughputs approaching 1MIPS per MHz, allowing you to optimize power consumption versus processing speed.
ATmega88PA
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 8
CPU Speed (MIPS/DMIPS): 20
SRAM Bytes: 1,024
Data EEPROM/HEF (bytes): 512
Digital Communication Peripherals: 1-UART, 2-SPI, 1-I2C
Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 6PWM
Timers: 2 x 8-bit, 1 x 16-bit
Number of Comparators:1
Temperature Range (C): -40 to 85
Operating Voltage Range (V): 1.8 to 5.5
Pin Count: 32
Low Power: Yes
PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics: Program Memory Type: Flash Program Memory Size (KB): 7 CPU Speed (MIPS/DMIPS): 5 SRAM Bytes: 192 Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C) Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP, Timers: 2 x 8-bit, 1 x 16-bit ADC Input: 5 ch, 8-bit Temperature Range (C): -40 to 125 Operating Voltage Range (V): 2 to 5.5 Pin Count: 28
PIC18F25J11
Features:
- 13nA Deep Sleep mode
- 54nA Sleep mode (RAM retention)
- 830nA Real Time Clock & Calendar operation in Sleep modes
- 820nA Watch Dog Timer operation in Sleep modes
- Deep Sleep mode ideal for battery applications
- Peripheral Pin Select for mapping digital peripherals to various I/O for design flexibility
Reviews
There are no reviews yet.