Note: This product only includes the CSI cable and does NOT include a Raspberry Pi Camera Module. The module will need to be purchased separately.
RASPBERRY Pi Zero Camera Cable
The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi board — luckily, that’s where this cable can help! The Raspberry Pi Zero Camera Cable replaces the pre-existing camera module cable, allowing your Zero or Zero W light and imaging capabilities.
This cable measures 15cm from end to end and can easily be swapped in and out.
Compare
Related products
CH340G USB to TTL Converter (Upgraded)
Product Introduction:
- This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
- Supports Windows 98SE, 2000, XP, Vista, Window7,8,10 Mac OS 9, Mac OS X Linux 2.40.
High-Speed Mini-HDMI to HDMI Cable – 10 Feet
High-Definition Multimedia Interface (HDMI) has become the standard for high-definition digital devices. It combines both audio and video into one convenient cable. With this AmazonBasics High-Speed Mini-HDMI to HDMI Cable with Ethernet, you can play high-definition mobile content (movies, photos, and data) on your big-screen HDTV or computer monitor. Simply connect a digital camera, camcorder, MP3 player, or other Mini-HDMI-compatible device to the full-size HDMI port found on most video displays. From small, mobile device to large HDTV or projector, playback just got more impressive.
UTEK (UT-885)-USB 2.0 to RS485 / RS-422 Converter
Product Information:
- Standards: USBV1.1, 1.0, 2.0, RS-485, RS-422 TIA/EIA
- USB signal: VCC, DATA+, DATA-, GND, FG
- RS-485 signal: T/R+, T/R-, GND
- RS-422 signal: T+, T-, R+, R-, GND
- Working mode: asynchronous, point to point or point to multi-point, 2 lines half-duplex or 4 lines full-duplex
- Direction control: adopts traffic direction auto control technology
- Baudrate: 300-921.6Kbps auto-detect serial signal
- Loading capacity: supports point to multi-point communication, allows to connect 32 sets RS-422 or RS-485 device
- Transmission distance: 1,200m(9,600bps) for RS-485/422, no more than 5m for USB
- Port protection: 600W lightning, surge, ±15KV ESD protection
- Connector: USB-A male, RS-485/422 5 pins terminal block
- LEDs for indicating PWR TXD, and RXD activity
- Transmission media: twisted-pair or shielded cable
- Dimension: 62mm×33mm×16mm
- Operating temperature: -40℃ to 85℃
- Relative humidity: 5% to 95%
- Transmission distance: 0-1,200m（921600bps-300bps）
- Supports Win2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux
UTEK UT-203A- Passive Interface Converter Data Communication Adapter (RS232 to RS485/RS422)
Introduction:
- Mini size, DB9 connector, with terminal block
- Standards: RS-232, RS-485, RS-422 TIA/EIA
- Automatic traffic direction control, no need for external flow control signal (RTS)
- Power: port-powered, no need external power connected & serial port initialization, real TXD/RXD/GND communication
- Allows connecting 32 sets networking device
- Transmission distance: 1,200m
- Baud rate: 300ps-115.2kbps
- Transmission media: twisted-pair or shielded cable
- Working mode: asynchronous half-duplex (RS-485) or full-duplex (RS-422), without jumper setting
- Works with all communication software, plug & play
- Dimension: 63×33×17mm
- Operating temperature: -25℃ to 70℃
- Humidity: 5% to 95%
- Supports all operating systems
UTEK- UT-712 (2-ports RS485/422 PCI/PCI-Express to Serial)
UT-712- PCI to 2x RS485 / 422 ports Multi-Port Serial Card with 2.5KV isolation protection
Specification:
- Hardware Interface:
- Connector: DB9 male 2
- Bus: 32 bit Universal PCI
- Signal: RS-422: T/R+, T/R-, RXD+, RXD-, GND RS-485: Data+ (A) Data- (B) GND
- Transmission: 300bps-115.2kbps
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: None, Even, odd, Space, Mark
- Flow Control: RTS/CTS XON/XOFF
- Operating Temperature: 0~70℃
- Optical Isolation Protection: Isolation Voltage2500Vrms 500VDC Continuous DC/DC Module
- Interface Protection: 600W Surge Protection each line for RS-422andRS-485 interface ESD Protection
- Transmission: 1-1200meters (115200bps-9600bps)
- Operating Systems: Windows 2003/XP/2000/98/ME, Linux, UNIX Drivers
Reviews
There are no reviews yet.