Pepperl + Fuchs CCB10-30GM80-N1 Capacitive Sensor
Original price was: ₨9,500.00.₨9,120.00Current price is: ₨9,120.00.
Pepperl and Fuchs Ccb10-30gm80-n1 P/n106253s Capacitive Sensor Namur M30x1.5
Pepperl & Fuchs (CCB10-30GM80-N1 Capacitive Sensor)
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.
Specifications
| Attribute | Value |
|---|---|
| Body Style | Barrel |
| Thread Size | M30 x 1.5 |
| Detection Range | 10 mm |
| Supply Voltage | 5.9 → 22.7 V dc |
| Terminal Type | Wire Lead |
| IP Rating | IP67 |
| Maximum DC Voltage | 22.7V |
| Length | 80mm |
| Switching Current | 3 mA |
| Switching Frequency | 0 → 10 Hz |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +70°C |
| Reverse Polarity Protection | Yes |
| Housing Material | Stainless Steel |
You must be logged in to post a review.
Related products
DSP0501 (CNC Engraving Machine Wireless Control Handle)
- Totally independent from PC platform;
- Directly read files from U Disk;
- Easily process G code or PLT file with super size;
- Strong system and process file examining function;
- Easy to update system program;
- Supports high micro step which makes precise and fast process possible;
- Support to process part of the file;
- Reliable data protection and recover function;
- Friendly operating interface
F2100B CNC Controller for Plasma Cutting Machine
F2100B CNC system is in the company to absorb the advantages of many domestic and international CNC system, combined with the company F2100, F2200 and F2300, F3100, F5100 series CNC system, developed a more humane, more convenient, more cost-products effectiveness. The product uses two modes of digital three-axis position control, suitable for oxygen gas and plasma cutter industry processing. for two NC axes machine in all with the position control method.
The control system is light and portable, simple operation, easy to use, all operations has a menu or graphics clue, operate a fool. Humanization design all the switch, comfortable and convenient.
From the special control engine chip DSP core control system, DSP to the motor control so that the cutting process is more stable and reliable. DSP motion control algorithm for optimizing and updating in the original F2200, to make the machine more fluid and reliably, prolong the life of electrical and mechanical parts.
LJ12A3-4-Z/BX (Proximity Sensor, Inductive, NPN-NO Output)
* Signal: Black
RichAuto A12S Control System for 3 Axis Plasma Cutting Machine
RichAuto DSP controller A12S for CNC plasma cutting machine
- Stand-alone DSP controller for CNC plasma / gas / laser cutting machine control.
- Control 3 axis axis using STEP / DIR + THC protocol.
- Screen resolution of 128x64 pixels (monochrome), support for USB flash drives up to 32Gb.
- Built-in flash memory 512Mb.
Richauto A58 (4 axis CNC DSP motion control system)
Features:
- Brand new four axis motion coordinates control mode.
- Support A / C code format, as well as special M control code.
- 32 Port I / O can be changed and defined
- Intelligent processing memory function, support break point protection function and power failed.
- Parameters backup and restore function to avoid loss of important parameters.
- Strong anti-jamming intensity passed many CE tests.
- Parameters backup and restore function to avoid loss of important parameters.
- Making prism columns, for example complex polyhedral work piece work.
- Wildly used in Buddha products, stair column, sofa and leg table such system control equipment.
- Effective process and higher speed.
Reviews
There are no reviews yet.