Display Port Male To DisplayPort Male DP Cable for Dell HP monitors &ATL Nvidia Graphics Card (DP TO DP Cable)-1.8m
₨1,850.00 Original price was: ₨1,850.00.₨1,450.00Current price is: ₨1,450.00.
Overview:
Product Introduction:
DisplayPort is the latest and greatest high definition digital audio/video format. DisplayPort was introduced by the Video Electronics Standards Association (VESA) and is designed to take computer graphics to the next level. These High-Performance DisplayPort cables have pure copper conductors, gold plated connectors and shielding from EM and RF interference. DisplayPort is based on a micro packet data transmission protocol that allows for feature additions in the future. It currently supports up to 8.64 Gbps data rates. These cables have pure conductors, gold plated connectors and shielding from EM and RF interference. DisplayPort is based on a micro packet data transmission protocol that allows for feature additions in the future. The Video Electronics Standards Association (VESA) declares the final standard edition of the DisplayPort connector at present: as the inheritor of the DVI, DisplayPort will intensify the high definition audio signal \\ ‘s transmission while transferring the video signal.
Length: 6FT (1.8M)
The new DISPLAYPORT Male to DISPLAYPORT Male cable
Premium shielded GOLD Plated cable
Molded ends with strain relieve for reliability
Brand new high-quality generic cable.
Support 8-bit & 10-bit deep color.
The video and audio bandwidth support up to 10.8Gpbs
Support one lane, one direction, four-line connection.
Solid Pure Copper Conductors
Shielded to block out RF and EM interference
8.64 Gbps
Supports Display Port 20 pin.
Enable high quality optional digital audio transmissions.
Pure digital connection; supports video and audio.
Supports VESA and Consumer Electronics Association (CEA) standards.
Package:
You must be logged in to post a review.
Related products
CH340G USB to TTL Converter (Upgraded)
Product Introduction:
- This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
- Supports Windows 98SE, 2000, XP, Vista, Window7,8,10 Mac OS 9, Mac OS X Linux 2.40.
Industrial Grade UTEK UT-8801 USB to RS-232 Converter Ver 2.0(1-port USB to RS-232 Serial Converter with ESD protection)
Product Introduction:
-
Allows to connect RS232 device to your computer by USB port.
-
FTDI FT232 + 213 chip
-
All 9-wires out
- Real USB 2.0 specification is compliant for faster and steadier data communication.
-
USB bus-powered and no need external power required.
-
Supports Windows 98SE, ME, 2000, XP, Vista, Windows 7, Win 10, Linux v5.0 or above & Mac OS 8.6 or above.
-
cable length 1.5m
Micro HDMI to HDMI HD Video Cable for Raspberry Pi 4
PLC Programming Cable Suitable for Mitsubishi FX Series | USB-SC09-FX | Mitsubishi Electric
UTEK (UT-210T) RS232 to TTL interface protocol converter (TTL output 3.3V Port-powered)
UTEK (UT-885)-USB 2.0 to RS485 / RS-422 Converter
Product Information:
- Standards: USBV1.1, 1.0, 2.0, RS-485, RS-422 TIA/EIA
- USB signal: VCC, DATA+, DATA-, GND, FG
- RS-485 signal: T/R+, T/R-, GND
- RS-422 signal: T+, T-, R+, R-, GND
- Working mode: asynchronous, point to point or point to multi-point, 2 lines half-duplex or 4 lines full-duplex
- Direction control: adopts traffic direction auto control technology
- Baudrate: 300-921.6Kbps auto-detect serial signal
- Loading capacity: supports point to multi-point communication, allows to connect 32 sets RS-422 or RS-485 device
- Transmission distance: 1,200m(9,600bps) for RS-485/422, no more than 5m for USB
- Port protection: 600W lightning, surge, ±15KV ESD protection
- Connector: USB-A male, RS-485/422 5 pins terminal block
- LEDs for indicating PWR TXD, and RXD activity
- Transmission media: twisted-pair or shielded cable
- Dimension: 62mm×33mm×16mm
- Operating temperature: -40℃ to 85℃
- Relative humidity: 5% to 95%
- Transmission distance: 0-1,200m(921600bps-300bps)
- Supports Win2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux
UTEK UT-203A- Passive Interface Converter Data Communication Adapter (RS232 to RS485/RS422)
Introduction:
- Mini size, DB9 connector, with terminal block
- Standards: RS-232, RS-485, RS-422 TIA/EIA
- Automatic traffic direction control, no need for external flow control signal (RTS)
- Power: port-powered, no need external power connected & serial port initialization, real TXD/RXD/GND communication
- Allows connecting 32 sets networking device
- Transmission distance: 1,200m
- Baud rate: 300ps-115.2kbps
- Transmission media: twisted-pair or shielded cable
- Working mode: asynchronous half-duplex (RS-485) or full-duplex (RS-422), without jumper setting
- Works with all communication software, plug & play
- Dimension: 63×33×17mm
- Operating temperature: -25℃ to 70℃
- Humidity: 5% to 95%
- Supports all operating systems
UTEK- UT-712 (2-ports RS485/422 PCI/PCI-Express to Serial)
Specification:
- Hardware Interface:
- Connector: DB9 male 2
- Bus: 32 bit Universal PCI
- Signal: RS-422: T/R+, T/R-, RXD+, RXD-, GND RS-485: Data+ (A) Data- (B) GND
- Transmission: 300bps-115.2kbps
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: None, Even, odd, Space, Mark
- Flow Control: RTS/CTS XON/XOFF
- Operating Temperature: 0~70℃
- Optical Isolation Protection: Isolation Voltage2500Vrms 500VDC Continuous DC/DC Module
- Interface Protection: 600W Surge Protection each line for RS-422andRS-485 interface ESD Protection
- Transmission: 1-1200meters (115200bps-9600bps)
- Operating Systems: Windows 2003/XP/2000/98/ME, Linux, UNIX Drivers
Reviews
There are no reviews yet.