Showing 109–120 of 191 results

MCR100-6

MCR100-6, General Purpose SCR/Thyristor, 400V, 800mA

Feature:

Sensitive GATE (PNPN Reverse Blocking Thyristor type). Blocking Voltage to 600 V Onāˆ’State Current Rating of 0.8 Amperes RMS at 80Ā°C High Surge Current Capability āˆ’ 10 A

Micro-controller -STM8S001

Unlike most rivals, the STM8S001 has I2C, UART, and SPI interfaces, giving unusually versatile connectivity options. With a generous 8KB Flash memory, 1KB RAM, 128-byte EEPROM, and 3-channel 10-bit ADC also on-chip, it delivers key features of STā€™s most popular STM8S003 MCU in a space-saving, low-pin-count device.

MicroController STM32F429ZIT6

The STM32 F429/F439 microcontroller are based on the ARMĀ® Cortexā„¢ M4 microcontroller with 180 MHz CPU operating up to 256 KB SRAM and up to 2 MB of dual bank Flash with SDRAM interface, Chrom-ART and LCD-TFT controller. The STM32F439 crypto/hash processor provides hardware acceleration for AES 128, 192, 256, Triple DES, and hash (MD5, SHA-1).

Momentary Pushbutton Switch – 12mm Square

20.00

Description

This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly.

MOSFET- BS250P

N-Channel MOSFET- FQP30N06L

QFETĀ® N-Channel MOSFET, over 31A, Fairchild Semiconductor

Fairchild Semiconductorā€™s new QFETĀ® planar MOSFETs use advanced, proprietary technology to offer best-in-class operating performance for a wide range of applications, including power supplies, PFC (Power Factor Correction), DC-DC Converters, Plasma Display Panels (PDP), lighting ballasts, and motion control. They offer reduced on-state loss by lowering on-resistance (RDS(on)), and reduced switching loss by lowering gate charge (Qg) and output capacitance (Coss). By using advanced QFETĀ® process technology, Fairchild can offer an improved figure of merit (FOM) over competing planar MOSFET devices.

NDP6020P (P-CHANNEL)

If youā€™ve ever wondered how to control high current devices from a low-power microcontroller, a MOSFET is what you need. The NDP6020P is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with most 5V and 3.3v microcontroller or mechanical switches. This allows you to control high-power devices with very low-power control mechanisms.

NE5532

NE5532 Dual Low-Noise High-Speed Audio Operational Amplifier DIP8

Features:

Small-Signal Bandwidth: 10 MHz Output Drive Capability: 600 Ī©, 10 VRMS Input Noise Voltage: 5.0 nV/(Hz)^0.5 (Typical) DC Voltage Gain: 50000 AC Voltage Gain: 2200 at 10 kHz Power Bandwidth: 140 kHz Slew Rate: 9.0 V/Āµs Large Supply Voltage Range: Ā±3.0 to Ā±20 V Compensated for Unity Gain

Applications:

 Instrumentation and Control Circuits Telephone Channel Amplifiers

Negative Voltage Regulator- LM7912

LM7912 Voltage Regulator
- OUTPUT CURRENT UPTO 1.5A
 
- NO EXTERNAL COMPONENTS REQUIRED
 
- INTERNAL SHORT CIRCUIT CURRENT LIMITING
 
- INTERNAL THERMAL OVERLOAD PROTECTION
 
- OUTPUT TRANSISTOR SAFE-AREA COMPENSATION
 
- OUTPUT VOLTAGE OFFERED IN 4% TOLERANCE.

PIC12F617

Features:

  • Self Read-Write Flash Program Memory
  • Internal 4/8MHz oscillator
  • Comparator with hysterisis (user configurable)
  • Mid-Range core with 35 Instruction, 8 Stack Levels
  • 25mA Source/Sink current I/O
  • Two 8-bit Timer (TMR0/TMR2)

PIC12LF1840T39A

Features:

  • 1.8V-3.6V Operation
  • Self-Reprogrammable under Software Control
  • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Programmable Brown-out Reset (BOR)
  • Extended Watchdog Timer (WDT)
  • In-Circuit Serial Programmingā„¢ (ICSPā„¢) via Two Pins

PIC12LF1840T48A

Features:

  • Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
  • Flash Program Memory with self read/write capability
  • Internal 32MHz oscillator
  • Data Signal Modulator Module
  • MI2C, SPI, EUSART w/auto baud
  • ECCP (Enhanced/Capture Compare PWM) Module