Modules
uLCD-32PTU-Pi (3.2″ Raspberry Pi Display Module for the Raspberry Pi A, B and B+)
UNO R3 Sensor Shield V5 Expansion Board For Arduino
- Ready to plug & play.
- It can connect to various modules like sensors, servos, relays, buttons, potentiometers
- Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
UNO R3 WiFI Development Board ATmega328P+ESP8266 (32Mb RAM) |USB-TTL CH340G Development Board
USB to TTL FT232RL (3.3V/5V) FTDI Serial Converter Module for Arduino
Product Specification:
- The FT232R is a USB to serial UART interface
- A low-cost way to add USB capability to microcontrollers. Use this to give your own breadboard For USB capability for bootloading or downloading sketches.
- RXD/TXD transceiver communication indicator
- Includes over-current protection, using a 500ma self-restoring fuse
- This board includes a DTR pin needed to auto-reset when downloading to your device.
- Color: Red
- USB Power Supply: 3.3V or 5V (Selectable)
- Header pitch: 2.54mm
- Size:43*17mm
WaveShare DVK600 FPGA CPLD Expansion Board
WiFly RN-171
Features:
- Ultra low power for battery powered applications
- Firmware configurable transmit power: 0dBm to +12dBm
- Hardware interfaces: UART
- Supports Adhoc and infrastructure networking modes
- User programmable GPIO & ADCs
- Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
- Run directly from batteries or regulated power supplies
- Configuration over serial or wireless interface using simple ASCII commands
- Over the air firmware upgrade
- Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
- Full onboard TCP/IP stack (no external drivers required)
WizFi220 (WiFi)
WizFi220 is a Wi-Fi module that provides the robust and stable Wi-Fi connectivity. WizFi220 performs all functions for Wi-Fi connectivity and TCP/IP processing. All you have to do is just sending commands to the module via serial interface.WizFi220 is all compatible with WizFi210 in hardware & software, but it has the external power amplifier for the longer communication.
WizFi250 (WiFi)
XBee 1mW Wire Antenna
Description:
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
XBee 1mW Wire Antenna
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Zigbee CC2530 Wireless module with DRF1605H antenna (1.6Km Range)
This module is the best way to establish wireless network connection and UART Zigbee wireless data connection which is fully compatible with DRF1605H pin up to 1.6 km transmission distance.Zigbee Module parametersInput voltage : Standard:3.3V DCRange:2.6V-3.6V Temperature range : -40C~85C Net weight : 7.4g Series Rate : 38400bps(default), can be set9600bps, 19200bps, 38400bps, 57600bps, 115200bps Radio frequency : 2.4G(2460MHz),The user can change the channel through the serial port command2405MHz - 2480MHzStep size:5MHz) Wireless protocol : Zigbee2007 transmission distance : Visual, open, transmission distance 1600 metersOpera ng current : Emission:120mA(max),80MA(average), Receive 45mA(max) ;Standby:40MA(max) Receiving sensivity :-110 dBmMain chip : CC2530F256, 256K FLASH,The latest genera on of the company SOC ZigBee chip
