Sensor Modules
801S (Vibration Shock Sensor Module)
This Vibration sensor is based on the Hi high precision vibration sensor 801S, it has 2 outputs, includes TTL and analog output, the sensitivity of TTL output can be adjusted by the on-board potentiometer, you can also read the analog output with any ADC to get the vibration condition.Specification:
- LM393, 801S
- Voltage: DC 5V
- Size: 20mm* 32mm *11mm
ACS712 20A (Current Sensor Module)
Product Description:
- AC / DC 20A Current Sensing Module ACS712
- 100 mV/A output sensitivity
- 5. 0 V, single supply operation
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
- Ratiometric output from supply voltage
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- 80 kHz bandwidth
- Total output error 1.5% at TA = 25°C
- 1.2 mΩ internal conductor resistance
ACS712 5A (Current Sensor Module)
ACS758LCB-050B-PFF-T (Hall Effect Bi-directional 50A AC/DC Current Sensor Module)
Features:
- Industry-leading noise performance through proprietary amplifier and filter design techniques
- Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high voltage applications
- Total output error improvement through gain and offset trim over temperature
- Small package size, with easy mounting capability
- Monolithic Hall IC for high reliability
- Ultra-low power loss: 100 μΩ internal conductor resistance
- Galvanic isolation allows use in economical, high-side current sensing in high voltage systems
- AEC Q-100 qualified
- 3.0 to 5.5 V, single supply operation
- 120 kHz typical bandwidth
- 3 μs output rise time in response to step input current
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
AMG8834
Temperature Sensor Digital, Infrared (IR) 14-SMD Module
Product Specifications
| Sensor type | Infrared array sensor | |
| Maximum output current | 10mA | |
| Sensing distance | 7m | |
| Switch mode | digital | |
| Installation type | Surface mount | |
| Number of pins | 14 | |
| Maximum supply current | 4.5 mA | |
| size | 11.6 x 8 x 4.3mm | |
| height | 4.3mm | |
| length | 11.6mm | |
| series | Grid-EYE | |
| Maximum working temperature | +80 °C | |
| Maximum operating supply voltage | 5 V DC | |
| Minimum operating temperature | -20 °C | |
| width | 8mm |
B5T-007001-020 (Facial Recognition Image Sensor 1600H x 1200V Camera Module-90 Deg)
Overview:
| Part Status | Active |
| Type | Human Detection, Facial Recognition |
| Pixel Size | - |
| Active Pixel Array | 1600H x 1200V |
| Voltage - Supply | 5V |
| Package / Case | Module |
| Supplier Device Package | Module |
| Operating Temperature | 0°C ~ 50°C (TA) |
B5T001001 (G) (Human Facial Recognition Image Sensor Module)
BFD-1000 (Infrared Line Tracking Sensor Module)
BH1750FVI – GY-30 (Digital Light intensity Sensor Module)
General Specifications:
- Chip: BH1750FVI
- Power Supply: 3 - 5V
- Light Range：0 - 65535 lx
- Sensor Built-in: 16 bit AD converter
- Size(L x W): Approx. 3.2cm x 1.5cm
- Direct digital output, bypassing the complex calculation, bypassing the calibration
- Don't distinguish between ambient light
- Close to the spectral characteristics of visual acuity
- Widely used to 1-lux high precision measurement
- Standard NXP IIC communication agreement
BME680 (Temperature, Humidity, Pressure and Gas Sensor)
This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price! Like the BME280 & BMP280, this precision sensor from Bosch can measure humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter or better accuracy! The BME680 takes those sensors to the next step in that it contains a small MOX sensor. The heated metal oxide changes resistance based on the volatile organic compounds (VOC) in the air, so it can be used to detect gasses & alcohols such as Ethanol, Alcohol and Carbon Monoxide, and perform air quality measurements.Note: it will give you one resistance value, with overall VOC content, but it cannot differentiate gasses or alcohols.
BMP085 (Barometric Pressure Sensor Module for Arduino)
