Sensor Modules
GP2Y1010AU0F (Compact Optical Dust Sensor)
The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.
Technical specifications:
Supply voltage: DC5 ± 2 V
Operating current: 20mA (peak)
Sensitivity: 0.5 V / (0.1 mg / m3)
Minimum particle detection level: 0.8 m
Net air pressure: 0.9 V typ.
Operating temperature: -10 ~ 65
Storage temperature: -20 ~ 80
Size: 46 mm × 30 mm × 17.6 mm
Weight of the size: 15 g
Usage: mainly used for dust removal, alarm equipment, air purification equipment, dust collectors, - fire alarms, etc. Industrial equipment can detect smoke particles, pollen and other particles
GT-511C3 (Fingerprint Sensor Scanner/Reader Module – 3V TTL)
Product Overview:
- High-Speed, High-Accuracy Fingerprint Identification using the SmackFinger 3.0 Algorithm
- Download Fingerprint Images from the Device
- Read and Write Fingerprint Templates and Databases
- Ultra-thin optical sensor
- Simple UART protocol (Default 9600 baud) | & USB communication protocol
- Matching Mode: Capable of 1:1 Verification and 1:N Identification
- Average Search Time: < 1sec | Image Acquire Time: <0.5sec
- Supports Downloading fingerprint image from the device
- Reading & writing fingerprint template(s) from/to the device
- Storing 200 different fingerprints
- 360-degree recognition
GT-521F52 (Finger Print Scanner Module)
Feature:
- Simple UART & USB communication protocol
- Complies with USB 2.0 full-speed (12Mbps) specification
- Ultra-thin Optical Sensor
- Resolution 450 DPI
- 200/3000 fingerprints storage
- Wake up on Finger Function
- Works well with dry, moist or rough fingerprints
- Anti-Scratch with surface high hardness≧ 5H
- 1:1 verification, 1:N identification
- Reading & writing fingerprint template(s) from/to the device
- High-accuracy and high-speed fingerprint identification technology
- Downloading fingerprint image from the device
- Convenient & Safe & Facilitation—Just one touch and easy to enroll
GUVA-S12SD (UV Sensor Module)
The GUVA-S12SD UV Sensor chip is suitable for detecting the UV radiation in sunlight. It can be used in any application where you want to monitor the amount of UV light and it is simple to connect to any microcontroller. The module, with a typical UV detection wavelength of 240 – 370nm, outputs a calibrated analog voltage which varies with the UV light intensity so basically all you need to do is connect this to an ADC input and read the ultraviolet intensity values.
GY-485-44009 (High Precision Light Intensity Sensor Module)
GY-652 (Air Pressure + Magnetic Field Sensor Module)
This is the GY-652 Sensor Module with HMC5983 and BMP180 Electronic Compass which enables us to measure Atmospheric Pressure and Magnetic Fields about 3 axes along with Pressure.
- Model: GY-652
- The use of chip: HMC5983 + BMP180
- Power supply :3-5v (internal low dropout regulator)
- Communication modes: standard IIC communication protocol)
- Magnetic field range: ± 0.88 to ± 8.1 gauss
- Pressure Range :300-1100hPa
- Chip 12bit AD converter, 16-bit data output
- Machine welding process to ensure quality
- Size: 13mm * 14mm (standard pitch 2.54mm)
- for ARDUINO test code
GY-AMG8833 (IR 8×8 infrared camera array temperature sensor module)
GY-US42 (ULTRASONIC SENSOR I2CXL-MAXSONAR)
Hall Current Sensor Module ACS712 30A -(VCC-OUT-GND)
Hall Current Sensor Module- ACS712-30A (GND-OUT-VCC)
Summary:
- chip current sensor: ACS712-30A
- 5V pin power supply, built-in power indicator
- The module can measure the positive and negative 30 amps, corresponding to the analog output 100mV / A
- There is no feeling that the current has been passed, the voltage output is VCC / 2
- PCB board size: 31 (mm) x13 (mm)
Note: ACS712 hall detection is based on the principle, please try to avoid using the magnetic field caused by the impact of this!
HC-SR04 (Ultrasonic Range Measurement Module)
Working Voltage: 5V(DC)
Static Current: Less than 2mA
Output Signal: Electric frequency signal, high level 5V, low level 0V
HCSR04 Ultrasonic Sensor
Sensor Angle: Not more than 15 degrees
Detection Distance: 2 cm to 450 cm
High Precision: Up to 2mm
Input Trigger Signal: 10us TTL impulse
Echo Signal: Output TTL PWL signal
Note: The module has a blind spot of 2cm (very near) so obstacle held too closely will not be detected.
HTG3515CH- (Voltage Output Temperature and Humidity Sensor)
Voltage Output Temperature and Humidity Sensor HTG3515CH
Relative Humidity and Temperature Module
SPECIFICATIONS:
- Suitable for small bulk assembly
- Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
- Full interchangeability. Better than +/-3%RH and +/-0.25°C
- Humidity calibrated within +/- 3% RH @ 55% RH
- Temperature measurement through NTC direct output
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications.