Sensor Modules
TFMini Lidar Sensor (Single Point Laser Radar Ranging Sensor Module)
(Ask For Latest Price)
General Features:
- Distance accuracy of 1 cm; Real-time display of data; small volume.
- Maximum operating range at 10% reflectivity : 5m. Applicable voltage range : 4.5-6V.
- About Connector: one terminal of the connectors is GH1.25-4P, connecting with TFmini. And the other terminal is 1.25-4p, it's similar to Molex510210
- Applications:Drone, smart car, for Arduino, raspberry pi, Pixhawk etc.
TMP006 (Contact-less Infrared Temperature Measurement)
The TMP006 works with 3v to 5v, so it can be used with most microcontrollers without the need for a level shifter. It connects via the i2c bus and is addressable so you can have up to 8 TMP006 sensors on the same bus.
Features:
- 20mm x 20mm (board w/o headers)
- Uses I2C 7-bit addresses between 0x40 and 0x47, selectable with jumpers
- Interface Type : I2C Arduino driver module
TSL 2561 (Light sensor Evaluation Board)
TSL2561 - Light, Ambient Sensor Evaluation BoardApproximates Human eye Response
Precisely Measures Illuminance in Diverse Lighting Conditions
Temperature range: -30 to 80 *C
Dynamic range (Lux): 0.1 to 40,000 Lux
Voltage range: 2.7-3.6V
Interface: I2C
This board/chip uses I2C 7-bit addresses 0x39, 0x29, 0x49, selectable with jumpers
TSL2581FN (Ambient Light Sensor-Street Light Control Sunlight)
General Features:
- Features TSL2581FN with ADC, feels the ambient light just like human vision
- I2C interface directly outputs the ambient light intensity value, needs no calibration, less noise interference
- Embedded infrared photodiode, gets high precision output even in environments with strong infrared noise interference
- Features interrupt output, programmable upper/lower thresholds
- Sensitivity is about 30 times higher than TSL2560/TSL2561
- Embedded voltage level translate circuit, allows directly connecting to 3.3V/5V MCU systems
TTP 223B (Touch Thumb Sensor Module)
Product description:
This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223 touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen.This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Even isolated by some cloth and paper, it still can feel the touch. And the sensitivity well decrease as isolation get thick.
TTP224 (4 Channel Digital Capacitive Touch Sensor Button Switch Module For Arduino)
TTP226 (8-Channel Digital Capacitive Switch Touch Sensor Module)
TTP229-LSF (Capacitive Touch Keypad Module)
Features:
- On board 8 capacitive touch keys and 1 linear capacitive sensor
- Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
- The system recalibrates automatically when all keys are not detected touch more than about 4 seconds
- Customizable functions:
- 8 keys or 16 keys option
- 8 individual outputs or batch production
- Single-key or multi-kye feature
- Sampling rate and duration of sampling in sleep mode
- The maximum key is on time
US-015 (Ultrasonic Distance Sensor Module)
US-015 Ultrasonic ranging module is capable of the 2cm ~ 4m non-contact distance measuring function, contrast to the HC-SR04 Ultrasonic Ranging Sensor , this module has a larger measure range. the supply voltage is 5V, The static power consumption is less than 3mA. This module supports the GPIO Communication mode, which is stable and reliable with the watchdog.
Specification:
- Working Voltage: 5VDC
- Output Signal: Electric frequency signal, high level 5V, low level 0V.
- Working Temperature : 0-70C
- Static Current: Less than 3mA
- Sensor angle: Not more than 15 degrees.
- Detection distance: 2cm~400cm.
- Precision: 0.3cm + 1%
- Mode of connection: VCC / trig(T) / echo(R) / GND
UVM-30A (Ultraviolet Ray Sensor Detection Module)
Feature:Working voltage: DC 3-5 v
Output voltage: DC 0-1 v
Test accuracy: + / - 1uv INDEX
Working current: Typical values 0.06 mA, The maximum 0.1 mA
Response wavelength: 200 nm to 370 nm
Work stability: - 20 ℃ ~ +85 ℃Application:UV tester, UV index instrument, outdoor UV monitoring equipment, sterilization lamp, flame detection
VEML6040 (RGBW-Color-Sensor Breakout / I2C)
The VEML6040 is a small, low power, color sensor that incorporates photo diodes, amplifiers, and analog / digital circuits into a single CMOS chip.It provides an accurate response to red, green, blue, and white light and outputs the information over an easy to use I2C interface. Furthermore, it provides excellent temperature compensation, keeping the output stable under changing temperatures.GY also added an LED to improve measurements.Please check the attached datasheet for more information.Size: 10.5mm x 13mm
