Ultrasonic Sensors
GH-311RT (Ultrasonic Distance Ranging Sensor)
GY-US42 (ULTRASONIC SENSOR I2CXL-MAXSONAR)
HC-SR04 (Ultrasonic Range Measurement Module)
Working Voltage: 5V(DC)
Static Current: Less than 2mA
Output Signal: Electric frequency signal, high level 5V, low level 0V
HCSR04 Ultrasonic Sensor
Sensor Angle: Not more than 15 degrees
Detection Distance: 2 cm to 450 cm
High Precision: Up to 2mm
Input Trigger Signal: 10us TTL impulse
Echo Signal: Output TTL PWL signal
Note: The module has a blind spot of 2cm (very near) so obstacle held too closely will not be detected.
HY-SRF05 (Ultrasonic Distance Measuring Sensor Module)
The HY-SRF05 is an ultrasonic emitter/receiver used to measure distance with a precision of ~0.3cm. It sends out a 40 KHz square wave signal that reflects on objects in front of the sensor. This signal is then read back by the sensor and the duration of the received signal is reflected on the ECHO pin.
JSN-SR04T (Integrated Waterproof Ultrasonic Ranging Module)
The JSN-SR0T4 ultrasonic ranging module can provide 20cm-600cm non-contact distance sensing function, and the ranging accuracy can be up to 2mm . The module consists of an integrated ultrasonic sensor and control circuit. This product adopts industrial grade integrated ultrasonic probe design, waterproof type, stable performance, and can work with all MCU in the market. 1. The performance of this module is stable and the measurement distance is accurate. It can compete with foreign ultrasonic ranging modules such as SRF05 and SRF02 . High precision module, blind zone (20cm), stable ranging is a powerful basis for this product to successfully enter the into market.
MB1403 (USB Ultrasonic Range Finder-MaxSonar-EZ0)
Overview:
- USB interface
- Resolution of 1 mm
- Multi-sensor operation
- ~250mS between range readings
- Maximum Range of 5000 mm (196 inches)
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS compliant
- Virtually no sensor dead zone, objects closer than 30 cm range as 30 cm
- Small, light weight module
- Designed for easy integration into your project or product
- Widest beam of the HRUSB-MaxSonar-EZ sensors
- Great for people detection applications
RCW-0001 (Micro Ultrasonic Range Distance Measuring Module)
RCW-0001 Micro Ultrasonic range Distance Measuring module robot electronics 3.3-5v 1cm Ultra-small blind Ultrasonic Sensor
Description:
RCW-0001 Micro Ultrasonic range Distance Measuring module robot electronics 3.3-5v 1cm Ultra-small blind Ultrasonic Sensor. External control software is fully compatible with the HC-SR04, the use of specialized mediation chip, the smallest blind 1cm Ultra-small blind, ultra mini volume Below are the main technical parameters;1: Voltage: DC 3.3-5V 2: Induction angle: not more than 15 degrees 3: detection distance range: 1cm-450cm Board wiring: VCC, trig (control side), echo (receiving end), out (empty feet), GND Note: To avoid high level, better to insert module to circuit board before powering, if has high level, restart power to solve it.
US-015 (Ultrasonic Distance Sensor Module)
US-015 Ultrasonic ranging module is capable of the 2cm ~ 4m non-contact distance measuring function, contrast to the HC-SR04 Ultrasonic Ranging Sensor , this module has a larger measure range. the supply voltage is 5V, The static power consumption is less than 3mA. This module supports the GPIO Communication mode, which is stable and reliable with the watchdog.
Specification:
- Working Voltage: 5VDC
- Output Signal: Electric frequency signal, high level 5V, low level 0V.
- Working Temperature : 0-70C
- Static Current: Less than 3mA
- Sensor angle: Not more than 15 degrees.
- Detection distance: 2cm~400cm.
- Precision: 0.3cm + 1%
- Mode of connection: VCC / trig(T) / echo(R) / GND