GPS module SR-87 (ProGin)
- Place of Origin: Taiwan
- Brand Name: ProGin
- Model Number: GPS module SR-87
- Supply Voltage: 3.3-5v
- Dissipation Power: 50mA
- Operating Temperature: -10~+60C
- Antenna connector type: MMCX
Specifications
1)GPS module SR-87
2)Build on high performance SiRF GSC3f/LP chipset SR-87
3)Low power consumption GPS module
GPS Module,SR-87, circuit electronic,SR-87, GPS module ,GPS module SR-87
Professional engineer team provides the one-stop solution for you.
Build on high performance SiRF GSC3f/LP chipset.
–Average Cold Start time and under 42 seconds.
–Low power consumption
2. Electrical Characteristics
2.1 General
1). FrequencyL1, 1575.42 MHz.
2). C/A code1.023 MHz chip rate.
3). Channels20(according to SiRFs spec.).
2.2 Accuracy (Open Sky)
1). Position10 meters, 2D RMS.
2). 7 meters 2D RMS, WAAS corrected.
3). 1-5 meters, DGPS corrected.
4). Altitude < ± 35m Vertical in term of 95%.
5). Velocity0.1 meters/second.
6). Time 1 microsecond synchronized to GPS time.
2.3. Physical Characteristics
1) Active Size: 25.4(W) x 25.4(D) x 7(H) (mm) .
2) Weight: 8 g.
3) Interface connector 6-pin straight male header, 1.25 mm pitch .
You must be logged in to post a review.
Related products
Arduino Ethernet Shield w/o PoE (Wiznet W5100)
(Get A latest Price)
Arduino M0 Pro – ATSAMD21G18 Controller
- 1.Micro Controller:ATSAMD21G18,48pins LQFP
- 2.Working Voltage:3.3V
- 3.Digtal I/O Pin:14,12 Piece PWM and UART
- 4.Analog Input Pin:6,12-status ADC channels
- 5.Analog Output Pin:1,10-status DAC
- 6.Each I/O Pin's Direct Current:7 mA
- 7.Flash Memory:256 KB
- 8.SRAM:32 KB
- 9.EEPROM:Through Simulation Highest is 16KB
- 10.Clock Spead:48 MHz
- 11.L*W:2.7*2.1 inches
- 12.External Power:5V1A~2A
- 13.Weight:70g
Arduino Pro Mini Atmega168 (3.3V/ 8MHz, 5V/16MHz)
Features:
- 14 Digital input / output ports RX, TX D13, D12
- 8 analog input port A0 to A7
- The TTL level serial transceiver port RX / TX
- 4.6 PWM ports, D3,, D5 , D6, D9, D10, D11
- Using Atmel Atmega168P microcontroller
- Supports serial download (TTL)
- Support for external 5V ~ 12V DC power supply
- Support 9V battery-powered
- clock frequency 16MHz
Package includes:
-
1x Arduino Pro mini Atmega168 module board
- 3x header pin rows
Mega+WiFi R3 ATmega2560+ESP8266 32Mb Flash Memory USB-TTL CH340G Micro USB port
Raspberry Pi 3 Model B (1GB)
SIMCom- SIM900-DS
XBee 1mW Wire Antenna
Description:
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
Reviews
There are no reviews yet.