-23%
8-Channel Relay Module (24VDC)| High/Low Level Trigger with Optocoupler Isolation Load DC 30V/10A AC 250V/10A for PLC
Original price was: ₨1,850.00.₨1,550.00Current price is: ₨1,550.00.
1 Channel 30A relay module | 5V12V24V | with optocoupler isolation high and low level trigger for Arduino & PLC industrial control
Original price was: ₨700.00.₨650.00Current price is: ₨650.00.
4 way 5V,12V,24V/30A relay module high and low level trigger smart home & PLC industrial control
Original price was: ₨3,210.00.₨2,470.00Current price is: ₨2,470.00.
Introduction:
4-channels independent relay module can choose to work in either Active HIGH or Active LOW condition, users can choose which channel is Active HIGH or some channels are Active LOW, can withstand current up to 30A/250VAC.
Description
Product Description:
4 channel relay module 30A with optocoupler isolation 12v supports high and low-level triggers for Smart home and PLC automation control.
Features:
- Using double-sided FR-4PCB board
- Using a high-power relay, control the load up to 30A.
- With each optocoupler isolation, anti-interference ability
- Black 9500 terminals, more convenient for high-current wiring
- Each circuit has a relay with an LED indication.
- The modules comply with international safety standards with isolation slots in the control and load areas.
Applications:
PLC automation equipment control, industrial system control, internet of things control, home intelligent control, electronic hobbyist development experiment, all kinds of circuit modification
- Supply voltage: 12V
- Quiescent current: 5mA
- Maximum operating current: 190mA
- Trigger mode: low trigger, high trigger
- Load voltage: DC 30V or AC 250V
- Load current: 30A
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
Arduino DUE R3 Board SAM3X8E 32-bit Cortex-M3 Control Board Module
Overview:
Arduino Due Microcontroller Board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button
Arduino Ethernet Shield w/o PoE (Wiznet W5100)
(Get A latest Price)
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a standard RJ45 Ethernet jack using the shield.
Arduino MEGA 2560 R3 (ATMEGA2560-16AU MCU)
Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Arduino Nano V3.0 CH340 Improved Atmega328P USB to TTL with USB cable
Overview:
- Microcontroller: Atmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory:32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM:2 KB (ATmega328)
- EEPROM:1 KB (ATmega328)
- Clock Speed:16 MHz
Raspberry Pi Compute Module 3 – 4Gbytes eMMC Flash
Raspberry Pi Calculation Module 3
Raspberry Compute Module 3 is for designers who prefer Raspberry Pi3 functionality but require a smaller form factor (67.6 mm X 31 mm) for their embedded design. These modules are DDR2-SODIMM, mechanically compatible system-on-a-chip (SoM) that includes a BCM2837 processor system-on-a-chip (SoC) with 1 GB of LPDDR2 RAM and 4 GB of eMMC flash. In addition, these modules have an additional input/output (I/O) interface in addition to the Raspberry Pi Model A/B board.
U-BLOX NEO-6M module (GY-GPS6MV2)
This GPS is a very capable GPS for the price and size. Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432.
Power the module and it will automatically acquire satellite signals and a position fix. Once it has a position fix the module will blink the on board LED. This LED will continue to blink while the module has a position fix.
The Product contains the following parts;
- 1 — u-blox NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
- 1 — GPS antenna
- 1 — 1x4 male header
Reviews
There are no reviews yet.