ACS712 5A (Current Sensor Module)
Product Overview:
- Bidirectional current sensing up to 5A
- Electronic isolation by hall effect
- ACS712ELCTR-05B-T Current Sense IC
- AC/DC Current to Voltage Conversion
- Accuracte Sensing Range: -5A to +5A
- Current to Voltage Ratio: 185mV/A
- Operating Voltage: 5V
- Total Output Error: ±1.5%
- On-board Power Indicator
Compare
Description
Description:
ACS712 5A Current Sensor is a current sensing board based on Allegro’s ACS712 magnetic linear current sensor IC. ACS712 can sense current up to bidirectional 5A with lower than 5% error. The sensor’s output is analog voltage(185mV/A).
ACS712 5A Current Sensor uses hall effect while sensing current Because of that it can be easily used in applications that require electronic isolation. The filter pins on the board can be used to adjust the bandwidth (80kHz default) by connecting a capacitor.
General Specifications:
- Bidirectional current sensing up to 5A
- Electronic isolation by hall effect
- Adjustable bandwidth
- Wide operating temperature range
- Nearly zero magnetic hysteresis
- Ratiometric output from supply voltage
Technical Specifications:
- Operating Voltage: 3-5V
- Internal Resistance: 1.2mΩ
- Operating Temperature: -40⁰C – 85⁰C
- Weight: 1g
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
CJMCU-175 (Digital Temperature Sensor Module)
General Features:
CJMCU-175 Digital Temperature Sensor TMP175 27 Address
Digital output: SMBusTM, two-wire and I2C interface compatibility
Resolution: 9 to 12 digits, user selectable
Wide supply voltage range: 2.7V to 5.5V
TMP175 allowing up to 27 devices on a bus member.
It is a negative temperature desired coefficient thermistor (NTC) and positive temperature coefficient (PTC) for generation
The device provides a typical ±1°C accuracy without calibration or external component signal conditioning .
The on-chip 12-bit analog -to- digital converter (ADC) provides resolution down to 0.0625°C.
HTG3515CH- (Voltage Output Temperature and Humidity Sensor)
Voltage Output Temperature and Humidity Sensor HTG3515CH
Relative Humidity and Temperature Module
SPECIFICATIONS:
- Suitable for small bulk assembly
- Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
- Full interchangeability. Better than +/-3%RH and +/-0.25°C
- Humidity calibrated within +/- 3% RH @ 55% RH
- Temperature measurement through NTC direct output
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. 
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
Motion Detecting Module- Zilog ePIR
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive infrared (PIR) sensor, which is shielded by a Fresnel lens. Taking advantage of the processing capabilities of the Z8 MCU, the ePIR uses a powerful new statistical processing method to provide exceptional motion detection performance.
TTP229-LSF (Capacitive Touch Keypad Module)
Features:
- On board 8 capacitive touch keys and 1 linear capacitive sensor
- Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
- The system recalibrates automatically when all keys are not detected touch more than about 4 seconds
- Customizable functions:
- 8 keys or 16 keys option
- 8 individual outputs or batch production
- Single-key or multi-kye feature
- Sampling rate and duration of sampling in sleep mode
- The maximum key is on time
Reviews
There are no reviews yet.