ATmega16M1
8-bit AVR Microcontroller with 16KB self-programming Flash Program Memory, 1KB SRAM, 512B EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 – 5.5 Volt operation.
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 16
CPU Speed (MIPS/DMIPS): 16
SRAM Bytes: 1,024
Data EEPROM/HEF (bytes): 512
Digital Communication Peripherals: 1-UART, 1-SPI,
Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 14PWM
Timers: 1 x 8-bit, 1 x 16-bit
Number of Comparators: 4
Number of CAN Modules: 1 CAN
Temperature Range (C): -40 to 85
Operating Voltage Range (V): 2.7 to 5.5
Pin Count: 32
You must be logged in to post a review.
Related products
PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics: Program Memory Type: Flash Program Memory Size (KB): 7 CPU Speed (MIPS/DMIPS): 5 SRAM Bytes: 192 Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C) Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP, Timers: 2 x 8-bit, 1 x 16-bit ADC Input: 5 ch, 8-bit Temperature Range (C): -40 to 125 Operating Voltage Range (V): 2 to 5.5 Pin Count: 28
PIC18F45K80
Features:
- 20 nA Sleep mode (Watch Webinar)
- 300nA Watch Dog Timer operation in Sleep modes
- Integrated ECAN™ conforming to CAN 2.0B active specification
- Extreme Low Power Sleep mode ideal for battery applications
- Operating voltage 1.8V – 5.5V
- Charge Time Measurement Unit (CTMU) supports Touch sensing and advanced sensing applications
PIC18F97J94
Features:
- • nanoWatt XLP technology • Deep sleep current is 60 nA typical • WDT : 650 nA @ 2V typical • RTCC: 650 nA @ 32 Khz, 2V typical • Vbat allows lowest power consumption on back up battery • Multiple, Switchable Clock Modes for Optimum Performance and Power Management • USB 2.0 full speed compliant with on chip transceiver • 480 segments of LCD display. • 60 X 8 commons • Drives LCD panel in Sleep mode • Internal charge pump for LCD • 64Mhz and upto 16 MIPS performance • Four 16 bit timers/counters • Seven Capture/Compare/PWM (CCP) • Three Enhanced Capture/Compare/PWM (ECCP) • Two Master Synchronous Serial Port (MSSP) feature SPI and I2C • Four UART with IrDA • 10/12 bit ADC with 24 channel resolution • Three Rail-to-Rail Enhanced Analog Comparators • Charge Time Measurement Unit (CTMU) for touch and measurements • Operating voltage 2.0V – 3.6V
Reviews
There are no reviews yet.