ATMEGA2560-16AU
IC MCU 8BIT 256KB FLASH 100TQFP
AVR AVR® ATmega Microcontroller IC 8-Bit 16MHz 256KB (128K x 16) FLASH 100-TQFP (14×14)
Core Processor | AVR |
Core Size | 8-Bit |
Speed | 16MHz |
Connectivity | EBI/EMI, I²C, SPI, UART/USART |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
Number of I/O | 86 |
Program Memory Size | 256KB (128K x 16) |
Program Memory Type | FLASH |
EEPROM Size | 4K x 8 |
RAM Size | 8K x 8 |
Voltage – Supply (Vcc/Vdd) | 4.5 V ~ 5.5 V |
Data Converters | A/D 16x10b |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 85°C (TA) |
Package / Case | 100-TQFP |
Supplier Device Package | 100-TQFP (14×14) |
Features:
• High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
– 135 Powerful Instructions – Most Single Clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16MHz
– On-Chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 64K/128K/256KBytes of In-System Self-Programmable Flash
– 4Kbytes EEPROM
– 8Kbytes Internal SRAM
– Write/Erase Cycles:10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85C/ 100 years at 25C
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True Read-While-Write Operation
– Programming Lock for Software Security
• Endurance: Up to 64Kbytes Optional External Memory Space
• Atmel® QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix acquisition
– Up to 64 sense channels
• JTAG (IEEE® std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Four 16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Four 8-bit PWM Channels
– Six/Twelve PWM Channels with Programmable Resolution from 2 to 16 Bits
(ATmega1281/2561, ATmega640/1280/2560)
– Output Compare Modulator
– 8/16-channel, 10-bit ADC (ATmega1281/2561, ATmega640/1280/2560)
– Two/Four Programmable Serial USART (ATmega1281/2561, ATmega640/1280/2560)
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
and Extended Standby
• I/O and Packages
– 54/86 Programmable I/O Lines (ATmega1281/2561, ATmega640/1280/2560)
– 64-pad QFN/MLF, 64-lead TQFP (ATmega1281/2561)
– 100-lead TQFP, 100-ball CBGA (ATmega640/1280/2560)
– RoHS/Fully Green
• Temperature Range:
– -40C to 85C Industrial
• Ultra-Low Power Consumption
– Active Mode: 1MHz, 1.8V: 500µA
– Power-down Mode: 0.1µA at 1.8V
• Speed Grade:
– ATmega640V/ATmega1280V/ATmega1281V:
• 0 – 4MHz @ 1.8V – 5.5V, 0 – 8MHz @ 2.7V – 5.5V
– ATmega2560V/ATmega2561V:
• 0 – 2MHz @ 1.8V – 5.5V, 0 – 8MHz @ 2.7V – 5.5V
– ATmega640/ATmega1280/ATmega1281:
• 0 – 8MHz @ 2.7V – 5.5V, 0 – 16MHz @ 4.5V – 5.5V
– ATmega2560/ATmega2561:
• 0 – 16MHz @ 4.5V – 5.5V
You must be logged in to post a review.
Related products
AT89C2051
ATmega32U4
PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics: Program Memory Type: Flash Program Memory Size (KB): 7 CPU Speed (MIPS/DMIPS): 5 SRAM Bytes: 192 Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C) Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP, Timers: 2 x 8-bit, 1 x 16-bit ADC Input: 5 ch, 8-bit Temperature Range (C): -40 to 125 Operating Voltage Range (V): 2 to 5.5 Pin Count: 28PIC16F88
PIC18F45K80
Features:
- 20 nA Sleep mode (Watch Webinar)
- 300nA Watch Dog Timer operation in Sleep modes
- Integrated ECAN™ conforming to CAN 2.0B active specification
- Extreme Low Power Sleep mode ideal for battery applications
- Operating voltage 1.8V – 5.5V
- Charge Time Measurement Unit (CTMU) supports Touch sensing and advanced sensing applications
PIC18F47K40
Features:
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 128 KB Flash Program Memory with self read/write capability
- 3728 Bytes Data SRAM Memory
Reviews
There are no reviews yet.