Banana PI D1 (Open-Source IP Camera with Wide-Angle Lens)
Banana pi Banana Pie BPI-D1 Open Source IP Camera
Description:
The BPI-D1 is the smallest open-source development board around, with a built-in HD mini camera. At 36mm (w) x36mm (l) and weighing in at 10g, it’s much smaller and lighter than any mini-cam or camera Board out there. It allows you to create and customize your own mini-cam and can be a valuable part of any cool hardware you are working on. The D1 prides itself on providing high-resolution image quality: Both video and photos are captured at 1280x720p with a video capture rate of 30 fps.
The BPI-D1 is designed specifically to give you all the multimedia tools you need in one small package. Simply connect to an external battery source (with your desired power capacity), and the D1 does the rest: there’s a HD mini-cam, Audio sensor, microphone, CPU, GPIO, WiFi, and more – you name it, the D1 has it.
The BPI-D1 is the smallest open source development board with a replaceable HD mini camera. The 38mm x 38mm form factor is only 10g, which is smaller and lighter than any mini camera or development board. It’s a mini camera that allows you to customize your own development and can be a valuable part of your work.
BPI-D1 provides high-resolution image quality: both video and photos support 1280x720p HD images with a video capture rate of 30 frames per second.
The unique design of the BPI-D1 allows you to provide the multimedia tools you need in a small package. Connected to mobile power (power capacity required), BPI-D1 will have: HD mini machine, microphone, CPU, GPIO, WiFi, etc.
Technical Specifications:
| Size | PCB 38x38mm |
| CPU | 400MHz ARM926EJ 32Bits RISC Core |
| RAM | 64MB DDR2 |
| Flash | 16MB SPI-FLASH |
| Storage | Micro SD Card Seat , supportable for 8G, 16G, 32G TF cards |
| CMOS | CMOS Image Sensor SoC30FPS@720P, Visible light with 940 nm two-way infrared lens filter, with infrared night vision function |
| Lens | M7*P0.35 EFL=3.0mm/F.NO=2.8/View Angle=60° |
| Video | It achieves H.264 hardware encoding at 1280x720p_30fps. 32G TF card can store 120 hours of video data |
| Audio | MP3/WMA/AAC |
| WIFI | USB wifi module support( OPTION ): WiFi module can be switch between the AP and the SLAVE mode, easy to configure the WiFi module; BPI- D1 support WPS mode |
| RTC | RTC circuit, and supporting OSD |
| PM | Support Li-ion Charging with Built-in AXP173 power management chip |
| Mic | Embedded electrets microphone |
| Power | Recording: 5V-200mA; WiFi On: 5V-350mA; |
| Consumption | Continuous record 720P video or audio data for 24hour when a mobile power of 10000mAH is available. |
| GPIO | 1UART/2GPIO; 2PWM/2GPIO; I2C; Audio Line IN; HP Audio Out L; HP Audio Out R; 1SPI Interface |
| UART | Independent UART debugging interface |
| USB | USB programmatic interface/ OTG device (WiFi module/USB drive) |
| DC IN | Micro-USB single +5V power input |
| Battery | 3.7V Li-ion socket |
| OS | Running on Linux3.4.35, Kernel Operation system that makes secondary development possible |
You must be logged in to post a review.
Related products
Arduino DUE R3 Board SAM3X8E 32-bit Cortex-M3 Control Board Module
Overview:
Arduino Due Microcontroller Board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button
Arduino MEGA 2560 R3 (ATMEGA2560-16AU MCU)
Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Arduino UNO R3 with USB cable (ATMEGA 328P)
Specifications:
Raspberry Pi 3 Model B (1GB)
Reviews
There are no reviews yet.