ESP8266 NodeMCU Lua WiFi Development Board
Original price was: ₨550.00.₨450.00Current price is: ₨450.00.
ESP8266 ESP-12F WiFi module
The module has the ability to run independent of a host controller.
The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network.
You can proceed to create your next internet of things (IOT) project with affordable network connectivity by implementing this module into your design.
The ESP8266 has 3.6V max tolerant I/Os so you will need a logic level converter to connect it with higher voltage devices such as Arduino.
The ESP8266 requires 3.3V power so you may need a 3.3V voltage regulator to provide the correct voltage, depending on your setup.
Description
Description:
This ESP8266 ESP-12F module is an upgrade to the ESP-12E. It is fully pinout and software compatible with the ESP-12E. This new design features a four layer PCB and improved antenna layout which increases the modules range.
ESP-12F WiFi module is a security technology developed by Letter to the module integrated core processor ESP8266 smaller package size tensilica L106 industry-leading ultra low power 32-bit MCU micro, with the 16 compact mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi-Fi MAC/BB/RF/PA/LNA, on-board antenna.
The module supports standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use the modules for an existing device to add networking, or building a separate network controller.
ESP8266 is high integration wireless SOCs, designed for space and power constrained mobile platform designers. It provides unsurpassed ability to embed Wi-Fi capabilities within other systems, or to function as a standalone application, with the lowest cost, and minimal space requirement.
ESP8266EX offers a complete and self-contained Wi-Fi networking solution; it can be used to host the application or to offload Wi-Fi networking functions from another application processor.
When ESP8266EX hosts the application, it boots up directly from an external flash. In has integrated cache to improve the performance of the system in such applications.
Alternately, serving as a Wi-Fi adapter, wireless internet access can be added to any micro controllerbased design with simple connectivity (SPI/SDIO or I2C/UART interface).
ESP8266EX is among the most integrated WiFi chip in the industry; it integrates the antenna switches, RF balun, power amplifier, low noise receive amplifier, filters, power management modules, it requires minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. ESP8266EX also integrates an enhanced version of Tensilica’s L106 Diamond series 32-bit processor, with on-chip SRAM, besides the Wi-Fi functionalities. ESP8266EX is often integrated with external sensors and other application specific devices through its GPIOs; codes for such applications are provided in examples in the SDK.
Features
- 802.11 b/g/n
- Integrated low power 32-bit MCU
- Integrated 10-bit ADC
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- Supports antenna diversity
- Wi-Fi 2.4 GHz, support WPA/WPA2
- Support STA/AP/STA+AP operation modes
- Support Smart Link Function for both Android and iOS devices
- SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation and 0.4s guard interval
- Deep sleep power <10uA, Power down leakage current < 5uA
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- +20dBm output power in 802.11b mode
- Operating temperature range -40C ~ 85C
- FCC, CE, and ROSH certified
Specifications
- Certificates: FCC/CE/ROSH
- WiFi Protocles：802.11 b/g/n
- Frequency Range：2.4GHz-2.5GHz (2400M-2483.5M)
- Peripheral Bus：UART/HSPI/I2C/I2S/Ir Remote Contorl/GPIO/PWM
- Operating Voltage ：3.0V-3.6V
- Operating Current: Average value: 80mA
- Operating Temperature Range: -40°~125°
- Ambient Temperature Range: Normal temperature
- Package Size: 16mm*24mm*3mm
- External Interface: N/A`
- Wi-Fi mode: station/softAP/SoftAP+station
- Security: WPA/WPA2
- Encryption: WEP/TKIP/AES
- Firmware Upgrade: UART Download / OTA (via network) / download and write firmware via host
- Support software Development: Supports Cloud Server Development / SDK for custom firmware development
- Network Protocols: IPv4, TCP/UDP/HTTP/FTP
- User Configuration: AT Instruction Set, Cloud Server, Android/iOS APP
Package list
- ESP-12F Wifi Module (ESP8266) x1
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
ESP8266 ESP-201 Remote Serial Port WiFi Transceiver Wireless Module
This ESP-201 module is one of the ESP8266 board version. This ESP8266 support both pcb antenna and external antenna using U.FL connector. ESP-201 comes with Ai-Thinker firmware as they are the 3rd party manufacture of Espressif chip. With a dimension of 25mm x 35mm, this board required de-soldering and soldering modification of middle pins to make sure it is breadboard friendly.
GLT240128-WB (LCD Graphic RS 232 BLU/WHT)
Full touch screen, no keypad needed! Our Graphic LCD Touch Panel provides you with a cost effective user interface solution for that great product/project you are developing. On board memory for Fonts and Bitmaps! This touch screen graphic LCD displays graphics and text in any font, style, justification and language, all with the convenience of a touch screen.
The Serial LCD Controller combines a 240 x 128 graphic LCD display a resistive touch screen, so you can get started creating powerful, simple user interfaces.
U-BLOX NEO-6M module (GY-GPS6MV2)
This GPS is a very capable GPS for the price and size. Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432.
Power the module and it will automatically acquire satellite signals and a position fix. Once it has a position fix the module will blink the on board LED. This LED will continue to blink while the module has a position fix.
The Product contains the following parts;
- 1 — u-blox NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
- 1 — GPS antenna
- 1 — 1x4 male header
uLCD-32PTU-Pi (3.2″ Raspberry Pi Display Module for the Raspberry Pi A, B and B+)
| Manufacturer | 4D Systems |
| Type of display | TFT |
| Screen size | 3.2" |
| Display resolution | 240x320 |
| Supply voltage | 5V DC |
| Contrast | 450:1 |
| Luminosity | 250cd/m2 |
| No. of colours | 65k |
| Window dimensions (H x W) | 48.6 x 64.8mm |
| Dimensions | 56.32 x 92.19 x 15.9mm |
| Kind of display | graphical |
| Microcontroller | PICASO |
| Series | Raspberry Pi |
| Viewing angle | 150° |
XBee 1mW Wire Antenna
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Reviews
There are no reviews yet.