IF5937- (IFM Electronic, M12 x 1, PNP/NPN-NO/NC Inductive Sensor 60mm Length)
Original price was: ₨6,700.00.₨6,400.00Current price is: ₨6,400.00.
Features:
- Opt-alloy plated brass housing IP67
- Four switching status LEDs
- A setting LED to indicate optimum sensing range
- Operating temperature range -25 → +70°C
- 4mA No load current
- Short circuit, overload and reverse polarity protection
- M12 Plug in, suitable for 4 way connectors
Specifications
| Attribute | Value |
|---|---|
| Body Style | Barrel |
| Thread Size | M12 x 1 |
| Output Type | PNP/NPN-NO/NC |
| Detection Range | 7 mm |
| Terminal Type | M12 – 4 Pin |
| Supply Voltage | 10 → 36 V dc |
| Length | 60mm |
| Maximum DC Voltage | 36V |
| Mounting Type | Non Flush |
| Switching Current | 100 mA |
| IP Rating | IP68 |
| Housing Material | Bronze Plated Brass |
| Minimum Operating Temperature | -25°C |
| Maximum Switching Frequency | 500Hz |
| Reverse Polarity Protection | Yes |
| Short Circuit Overload Protection | Yes |
| Maximum Operating Temperature | +70°C |
You must be logged in to post a review.
Related products
3 Axis NC Studio PCI motion ncStudio Control Card set for CNC router Engraving Milling Machine with Interface Adapter Breakout
- The system can directly support UG, MASTERCAM, CASMATE, Art CAM, AUTOCAD, CorelDraw and other CAD / CAM software to generate G-code, PLT code format and carved processing files ENG code format (carved file format without conversion, direct reading take)
- The system can be used with a variety of three-dimensional sculpture, three-dimensional carving and milling machine. Applicable to all kinds of complex mold processing, advertising and decorating, cutting and other industries
F2100B CNC Controller for Plasma Cutting Machine
F2100B CNC system is in the company to absorb the advantages of many domestic and international CNC system, combined with the company F2100, F2200 and F2300, F3100, F5100 series CNC system, developed a more humane, more convenient, more cost-products effectiveness. The product uses two modes of digital three-axis position control, suitable for oxygen gas and plasma cutter industry processing. for two NC axes machine in all with the position control method.
The control system is light and portable, simple operation, easy to use, all operations has a menu or graphics clue, operate a fool. Humanization design all the switch, comfortable and convenient.
From the special control engine chip DSP core control system, DSP to the motor control so that the cutting process is more stable and reliable. DSP motion control algorithm for optimizing and updating in the original F2200, to make the machine more fluid and reliably, prolong the life of electrical and mechanical parts.
NBN40-L2-E0-V1 (Pepperl + Fuchs Inductive Sensor)
Standard Inductive Sensor Product Features:
- Smooth or threaded stainless steel cylindrical housing
- Reverse polarity protection and short circuit protection
- LED status indication
- M8, M12 connector connection or terminal wiring
- PVC, PUR or silicon cable outlet
- 2-wire, 3-wire, 4-wire DC, AC, NAMUR output mode and AS-I bus mode output
PR08-2DP – (Inductive Proximity Sensor, PR Series, Cylindrical, Cable, 2mm, PNP)
Sensor, Inductive Prox, 2mm Sensing, M8 Round, Non-Shielded, NPN NO, 3 Wire, 12 - 24 VDC
| Proximity Sensor | |
| Type | Cylindrical round (PR Series) |
| Sensing Distance | 2 mm |
| Header demension / square | 8 mm |
| Shield | Non Shield |
| Connection Type | 2 m cable loose leads |
| Voltage | 12 - 24 VDC |
| Wire Type | DC 3-wire |
| Output Type | NPN |
| Frequency | 1000 Hz |
RichAuto A12S Control System for 3 Axis Plasma Cutting Machine
RichAuto DSP controller A12S for CNC plasma cutting machine
- Stand-alone DSP controller for CNC plasma / gas / laser cutting machine control.
- Control 3 axis axis using STEP / DIR + THC protocol.
- Screen resolution of 128x64 pixels (monochrome), support for USB flash drives up to 32Gb.
- Built-in flash memory 512Mb.
Reviews
There are no reviews yet.