MICS-6814 (Air Quality Co, NH3, Nitrogen Oxide Gas Sensor)
₨6,500.00 Original price was: ₨6,500.00.₨6,150.00Current price is: ₨6,150.00.
The MiCS-6814 is a 3 sensor device suitable for gas leak detection and outdoor air quality monitoring. MiCS-6814 can detect many unhealthful gases, and three gases can be measured simultaneously due to its multi channels, so it can help you to monitor the concentration of gases where you expect the existence of more than one gas.
Detectable gases:
- Carbon monoxide CO 1 – 1000ppm
- Nitrogen dioxide NO2 0.05 – 10ppm
- Ethanol C2H5OH 10 – 500ppm
- Hydrogen H2 1 – 1000ppm
- Ammonia NH3 1 – 500ppm
- Methane CH4 >1000ppm
- Propane C3H8 >1000ppm
- Iso-butane C4H10 >1000ppm
The MICS-6814 Air Quality Sensor , also known by its technical name as the MICS-6814 Gas Sensor, is a safety device used to monitor air quality in different environments in conjunction with microcontrollers, including Arduino, Raspberry Pi , PIC, among others.
It has the ability to accurately detect the concentration of Carbon Monoxide (CO), Nitrogen Dioxide (NO2), Ammonia (NH3), Methane (CH4), Propane (C3H8), Ethanol (C2H5OH), Hydrogen (H2), and Isobutane (C4H10) in a given environment, since these gases are extremely toxic to humans, acting on the following scales: 1 – 1000ppm (CO), 0.05 – 10ppm (NO2), 1 – 500ppm (NH3), > 1000ppm (CH4),> 1000ppm (C3H8), 10-500ppm (C2H5OH), 1-1000ppm (H2) and> 1000ppm (C4H10).
A major differential of this sensor model is the ability to measure / monitor the concentration of three gases simultaneously, having unique channels for each of them (Carbon Monoxide (CO), Nitrogen Dioxide (NO2) and Ammonia (NH3).
Applications:
The sensor is ideal for monitoring air intakes in industries, equipment, air conditioning, offices, schools, homes, and can be used in any environment to provide greater security for those who are monitored, especially in large cities where air pollution reaches alarming levels and dangerous to health.
FEATURES:
– air Quality Sensor MICS-6814; – Gas Sensor MICS-6814; – Compatible with Arduino, Raspberry Pi, PIC and others
– Detects Carbon Monoxide, Nitrogen Dioxide, Ammonia, Methane, Propane, Ethanol, Hydrogen and Iso-butane
– Keeps environments monitored and safe
– It sends signals to the platform of prototyping, that will be programmed to act of determined way before the happened thing
– Holes for fixing
– Long service life and reliable stability
– Rapid response and recovery
– Allows monitoring of 3 gases simultaneously (Carbon Monoxide, Nitrogen Dioxide and Ammonia)
– Provides greater security
SPECIFICATIONS:
– Model: MICS-6814
– Voltage: DC 5V
– Stimulus Signal: Carbon Monoxide, Nitrogen Dioxide, Ammonia, Methane, Propane, Ethanol, Hydrogen and Isobutane
– Detection scale: 1 – 1000ppm (CO), 0.05 – 10ppm (NO2), 1 – 500ppm (NH3),> 1000ppm (CH4),> 1000ppm (C3H8), 10-500ppm (C2H5OH), 1 – 1000ppm (H2) and> 1000ppm (C4H10)
– Dimensions (LxWxH): ~ 17x14x3mm
– Weight: 1.5 grm
You must be logged in to post a review.
Related products
AMG8834
Temperature Sensor Digital, Infrared (IR) 14-SMD Module
Product Specifications
Sensor type | Infrared array sensor | |
Maximum output current | 10mA | |
Sensing distance | 7m | |
Switch mode | digital | |
Installation type | Surface mount | |
Number of pins | 14 | |
Maximum supply current | 4.5 mA | |
size | 11.6 x 8 x 4.3mm | |
height | 4.3mm | |
length | 11.6mm | |
series | Grid-EYE | |
Maximum working temperature | +80 °C | |
Maximum operating supply voltage | 5 V DC | |
Minimum operating temperature | -20 °C | |
width | 8mm |
DHT11 (Temperature and Humidity Sensor Module)
DHT11 Temperature and Humidity Sensor Module with LED Power Supply Indicators
Features:
- Can detect surrounding environment of the humidity and temperature
- DHT11 sensor adopts
- Humidity measurement range: 20%-95%, humidity measurement error: +-5%
- Temperature measurement range: 0 -50 ;measurement error: +-2 degrees
- Working voltage 3.3 V-5 V
- Output form: digital output
- Has fixed bolt hole and easy installation
- PCB size: 3.1cm x 1.4cm
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
MQ-5 (Gas Sensor module LPG, Natural Gas, Coal Gas)
Overview
- Sensitive for LPG, natural gas, coal gas
- An increase in the output voltage along with the concentration of the measured gases
- Rapid reaction and recovery
- Adjustable sensitivity
- Output indicator
Gas Sensor type |
Sensitive gas |
Application |
MQ-135 Gas Sensor | Benzene, alcohol, smoke | Air Quality Monitoring |
MQ-2 gas sensor | HBO, propane, hydrogen | Gas leak detector |
MQ-3 gas sensor | Alcohol, ethanol | Carbon alcohol, Breathalyzer |
MQ-5 Gas Sensor | CIS, natural gas, coal gas | Gas leak detector |
MQ-7 gas sensor | Carbon monoxide | Carbon Monoxide Monitor |
MQ-6 LPG Gas Sensor Module
MQ-7 (Carbon Monoxide Gas Sensor Module)
T000220 (Arduino TinkerKit Touch Sensor Module)
- Based on a QT 100A single touch controller
- On-board-signal amplifier
- Green LED for correct power indication
- Yellow LED whose brightness depends on the values output by the module
TTP229-LSF (Capacitive Touch Keypad Module)
Features:
- On board 8 capacitive touch keys and 1 linear capacitive sensor
- Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
- The system recalibrates automatically when all keys are not detected touch more than about 4 seconds
- Customizable functions:
- 8 keys or 16 keys option
- 8 individual outputs or batch production
- Single-key or multi-kye feature
- Sampling rate and duration of sampling in sleep mode
- The maximum key is on time
Reviews
There are no reviews yet.