Orange Pi 2G-IOT ARM Cortex-A5
When it comes about the release of quality development boards, the Orange Pi boards seem dominating the Raspberry Pi. Each of the Orange Pi boards seems to give a tough time to the Raspberry Pi on One-on-One basis. The Orange Pi 2G-loT can obviously be seen countering the Raspberry Pi Zero. The board features a Sim card slot along with the Wi-Fi and Bluetooth connectivity.
What can I do with Orange Pi 2G-IOT?
Build…
- A computer
- A wireless server
- Games
- Music and sounds
- HD video
- A speaker
- Android
- Scratch
- Pretty much anything else, because Orange Pi 2G-IOT is open source
Who’s it for?
Orange Pi 2G-IOT is for anyone who wants to start creating with technology – not just consuming it. It’s a simple, fun, useful tool that you can use to start taking control of the world around you.
Hardware specification |
||
| CPU | ARM Cortex-A5 32bit | |
| GPU | Separate graphic processor, Vivante’s GC860
support OpenGLES1.1/2.0 support OpenVG1.4 support DirectFB support GDI/DirecShow 30M Triangle/s, 250M Pixel/s |
|
| Memory (SDRAM) | Integrated 256MB LPDDR2 SDRAM | |
| Onboard Storage | TF card / Integrated 512MB 8Bit 1.8V 4K SLC Nand Flash | |
| Onboard WIFI+BT | RDA5991, WIFI+BT | |
| 2G model | The four frequency single card
GSM/GPRS Dedicated accelerators SIM card |
|
| Video Input | A CSI input connector Camera
Supports 8-bit YUV422 CMOS sensor interface Supports CCIR656 protocol for NTSC and PAL Supports SM pixel camera sensor Supports video capture solution up to 1080p@30fps |
|
| Audio Input | MIC, 3.5 mm Jack | |
| Video Outputs | LCD | |
| Audio Outputs | 3.5 mm Jack, FM, SPEAK（Optional） | |
| Power Source | USB OTG can supply power Battery input can supply power（Optional） |
|
| GPIO(1×3) pin | UART, ground. | |
| USB 2.0 Ports | One USB 2.0 HOST, One USB 2.0 OTG | |
| Buttons | Power Button(SW602) | |
| Low-level peripherals | 40 Pins Header,compatible with Raspberry Pi B+ | |
| LED | Power led | |
| Supported OS | Android, Ubuntu, Debian, Raspbian Image | |
Interface definition |
||
| Product size | 67 mm × 42mm | |
| Weight | 35g | |
You must be logged in to post a review.
Related products
Arduino Ethernet Shield w/o PoE (Wiznet W5100)
(Get A latest Price)
Leonardo R3 Development Board ATMEGA32U4
Product specifications:
• Controller: ATmega32u4 • Work record: 16 MHz • Working voltage: 5V • Input voltage (recommended): 7-12V • Digital IO port: 20 • PWM channel: 7 • Analog input: 12 • 5V digital / analog port maximum allowable current: 40 mA • 3.3V digital / analog port maximum allowable current: 50 mA • Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader • SRAM: 2.5 KB (ATmega32u4) • EEPROM: 1 KB (ATmega32u4)
Raspberry Pi Compute Module 3 – 4Gbytes eMMC Flash
Raspberry Pi Calculation Module 3
Raspberry Compute Module 3 is for designers who prefer Raspberry Pi3 functionality but require a smaller form factor (67.6 mm X 31 mm) for their embedded design. These modules are DDR2-SODIMM, mechanically compatible system-on-a-chip (SoM) that includes a BCM2837 processor system-on-a-chip (SoC) with 1 GB of LPDDR2 RAM and 4 GB of eMMC flash. In addition, these modules have an additional input/output (I/O) interface in addition to the Raspberry Pi Model A/B board.
Simcom- SIM900
U-BLOX NEO-6M module (GY-GPS6MV2)
- 1 — u-blox NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
- 1 — GPS antenna
- 1 — 1x4 male header
XBee 1mW Wire Antenna
Description:
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
Reviews
There are no reviews yet.