You must be logged in to post a review.
PIC16F15355-I/SS
16F Microcontroller IC 8-Bit 32MHz 14KB (8K x 14) FLASH 28-SSOP
| Product Attributes | |
| Part Status | Active |
| Core Processor | PIC |
| Core Size | 8-Bit |
| Speed | 32MHz |
| Connectivity | I²C, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Number of I/O | 25 |
| Program Memory Size | 14KB (8K x 14) |
| Program Memory Type | FLASH |
| EEPROM Size | 224 x 8 |
| RAM Size | 1K x 8 |
| Voltage – Supply (Vcc/Vdd) | 2.3 V ~ 5.5 V |
| Data Converters | A/D 24x10b, D/A 1x5b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 28-SSOP (0.209″, 5.30mm Width) |
| Supplier Device Package | 28-SSOP |
Compare
Reviews (0)
Shipping & Delivery
Related products
PIC16F18877
Features:
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Adjustable Internal Oscillator (up to 32MHz)
- 2x 10-bit PWMs
- 5x Capture, Compare, PWM (CCP)
- Complementary Waveform Generator (CWG)
- Numerically Controlled Oscillator (NCO)
PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics:Program Memory Type: FlashProgram Memory Size (KB): 7CPU Speed (MIPS/DMIPS): 5SRAM Bytes: 192Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C)Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP,Timers: 2 x 8-bit, 1 x 16-bitADC Input: 5 ch, 8-bitTemperature Range (C): -40 to 125Operating Voltage Range (V): 2 to 5.5Pin Count: 28
PIC18F47K40
Features:
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 128 KB Flash Program Memory with self read/write capability
- 3728 Bytes Data SRAM Memory
PIC18F97J94
Features:
- • nanoWatt XLP technology • Deep sleep current is 60 nA typical • WDT : 650 nA @ 2V typical • RTCC: 650 nA @ 32 Khz, 2V typical • Vbat allows lowest power consumption on back up battery • Multiple, Switchable Clock Modes for Optimum Performance and Power Management • USB 2.0 full speed compliant with on chip transceiver • 480 segments of LCD display. • 60 X 8 commons • Drives LCD panel in Sleep mode • Internal charge pump for LCD • 64Mhz and upto 16 MIPS performance • Four 16 bit timers/counters • Seven Capture/Compare/PWM (CCP) • Three Enhanced Capture/Compare/PWM (ECCP) • Two Master Synchronous Serial Port (MSSP) feature SPI and I2C • Four UART with IrDA • 10/12 bit ADC with 24 channel resolution • Three Rail-to-Rail Enhanced Analog Comparators • Charge Time Measurement Unit (CTMU) for touch and measurements • Operating voltage 2.0V – 3.6V
Reviews
There are no reviews yet.