PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 7
CPU Speed (MIPS/DMIPS): 5
SRAM Bytes: 192
Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C)
Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP,
Timers: 2 x 8-bit, 1 x 16-bit
ADC Input: 5 ch, 8-bit
Temperature Range (C): -40 to 125
Operating Voltage Range (V): 2 to 5.5
Pin Count: 28
Device Overview
This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into 28-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F73 features 5 channels of 8-bit Analog-to-Digital (A/D) converter with 2 additional timers, 2 capture/compare/PWM functions and the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
You must be logged in to post a review.
Related products
PIC18F45K80
Features:
- 20 nA Sleep mode (Watch Webinar)
- 300nA Watch Dog Timer operation in Sleep modes
- Integrated ECAN™ conforming to CAN 2.0B active specification
- Extreme Low Power Sleep mode ideal for battery applications
- Operating voltage 1.8V – 5.5V
- Charge Time Measurement Unit (CTMU) supports Touch sensing and advanced sensing applications
PIC18F97J94
Features:
- • nanoWatt XLP technology • Deep sleep current is 60 nA typical • WDT : 650 nA @ 2V typical • RTCC: 650 nA @ 32 Khz, 2V typical • Vbat allows lowest power consumption on back up battery • Multiple, Switchable Clock Modes for Optimum Performance and Power Management • USB 2.0 full speed compliant with on chip transceiver • 480 segments of LCD display. • 60 X 8 commons • Drives LCD panel in Sleep mode • Internal charge pump for LCD • 64Mhz and upto 16 MIPS performance • Four 16 bit timers/counters • Seven Capture/Compare/PWM (CCP) • Three Enhanced Capture/Compare/PWM (ECCP) • Two Master Synchronous Serial Port (MSSP) feature SPI and I2C • Four UART with IrDA • 10/12 bit ADC with 24 channel resolution • Three Rail-to-Rail Enhanced Analog Comparators • Charge Time Measurement Unit (CTMU) for touch and measurements • Operating voltage 2.0V – 3.6V
Reviews
There are no reviews yet.