TFMini Lidar Sensor (Single Point Laser Radar Ranging Sensor Module)
(Ask For Latest Price)
General Features:
- Distance accuracy of 1 cm; Real-time display of data; small volume.
- Maximum operating range at 10% reflectivity : 5m. Applicable voltage range : 4.5-6V.
- About Connector: one terminal of the connectors is GH1.25-4P, connecting with TFmini. And the other terminal is 1.25-4p, it’s similar to Molex510210
- Applications:Drone, smart car, for Arduino, raspberry pi, Pixhawk etc.
Description:
TFmini is a single-point micro-range module that can be widely used in an integrated application of various drones, UAVs, Robots and industrial equipment. It is based on the ToF (flight time) principle and integrated with a unique optical and electrical design, so as to achieve stable, accurate, high sensitivity and high speed detection distance.
Features:
Operating range: 0.3-12 m
Maximum operating range at 10% reflectivity: 5 m
Applicable voltage range: 4.5-6 V
Average power consumption: 0.12 W
Acceptance angle: 2.3 °
Communication interface: UART
Electromagnetic compatibility (EMC): RU 55032 Class B
Data transfer rate: 115200
Data bit: 8
Stop bit: 1
Parity bit: 0
Minimum resolution: 5mm
Frequency: 100Hz
Wavelength: 850nm
Operating temperature: 20-60C
Light sensitivity: 70, 000lux <br>
Accuracy: 1% (less than 6 m), 2% (6 M-12 m)
Dimensions: 42 mm * 15 mm * 16 mm
Weight: 6.1 g
Main applications: unmanned altitude and terrain after machine control and safety sensor
Certification: CE, FCC, ROHS.
You must be logged in to post a review.
Related products
CJ1WTS562 (Temperature Sensor Module Screw Terminal Connection)
Highlights/Features:
Omron Temperature sensor module is suitable for use with cj1 series programmer controllers These temperature sensor units are classified as digital I/O units when considering I/O allocations and will take digital I/O points from the total allocation for a CJ1M CPU. The number of I/O points is DIP switch selectable as follows; configured for 1 - 3 inputs takes 48 digital I/O points, configured for 4 inputs takes 64 digital I/O points and configured for 5 - 6 inputs takes 96 digital I/O points.DHT11 (Temperature and Humidity Sensor Module)
DHT11 Temperature and Humidity Sensor Module with LED Power Supply Indicators
Features:
- Can detect surrounding environment of the humidity and temperature
- DHT11 sensor adopts
- Humidity measurement range: 20%-95%, humidity measurement error: +-5%
- Temperature measurement range: 0 -50 ;measurement error: +-2 degrees
- Working voltage 3.3 V-5 V
- Output form: digital output
- Has fixed bolt hole and easy installation
- PCB size: 3.1cm x 1.4cm
GY-AMG8833 (IR 8×8 infrared camera array temperature sensor module)
MAX6675-(Temperature Sensor With Thermocouple Cable)
MAX6675 Module + K Type Thermocouple Sensor:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to +700°C.MQ-5 (Gas Sensor module LPG, Natural Gas, Coal Gas)
Overview
- Sensitive for LPG, natural gas, coal gas
- An increase in the output voltage along with the concentration of the measured gases
- Rapid reaction and recovery
- Adjustable sensitivity
- Output indicator
Gas Sensor type |
Sensitive gas |
Application |
MQ-135 Gas Sensor | Benzene, alcohol, smoke | Air Quality Monitoring |
MQ-2 gas sensor | HBO, propane, hydrogen | Gas leak detector |
MQ-3 gas sensor | Alcohol, ethanol | Carbon alcohol, Breathalyzer |
MQ-5 Gas Sensor | CIS, natural gas, coal gas | Gas leak detector |
MQ-7 gas sensor | Carbon monoxide | Carbon Monoxide Monitor |
MQ-7 (Carbon Monoxide Gas Sensor Module)
T000220 (Arduino TinkerKit Touch Sensor Module)
- Based on a QT 100A single touch controller
- On-board-signal amplifier
- Green LED for correct power indication
- Yellow LED whose brightness depends on the values output by the module
TMP006 (Contact-less Infrared Temperature Measurement)
Features:
- 20mm x 20mm (board w/o headers)
- Uses I2C 7-bit addresses between 0x40 and 0x47, selectable with jumpers
- Interface Type : I2C Arduino driver module
Reviews
There are no reviews yet.