uLCD-32PTU-Pi (3.2″ Raspberry Pi Display Module for the Raspberry Pi A, B and B+)
| Manufacturer | 4D Systems |
| Type of display | TFT |
| Screen size | 3.2″ |
| Display resolution | 240×320 |
| Supply voltage | 5V DC |
| Contrast | 450:1 |
| Luminosity | 250cd/m2 |
| No. of colours | 65k |
| Window dimensions (H x W) | 48.6 x 64.8mm |
| Dimensions | 56.32 x 92.19 x 15.9mm |
| Kind of display | graphical |
| Microcontroller | PICASO |
| Series | Raspberry Pi |
| Viewing angle | 150° |
The uLCD-32PTU-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-32PTU 3.2″ LCD Display with Resistive Touch, a 4D Pi Adaptor and 5 way interface cable.
The uLCD-32PTU-PI customises the uLCD-32PTU Display specifically for interfacing with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.
The Raspberry Pi Display Module Pack enables a Raspberry Pi user to quickly connect the 4D Pi Adaptor Shield to their Raspberry Pi, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.
The uLCD-32PTU-PI has a comprehensive ViSi-Genie library written to communicate with the Raspberry Pi, allowing the Visi-Genie events to be easily understood by the Raspberry Pi and users code.
Utilises the Raspberry Pi’s UART Serial Port.
Display features:
- resistive touch panel
- smart
Interface:
- I2C
- UART
Programmers and development kits features:
- 13 I/O lines
- socket for microSD cards
- speaker
- audio amplifier
- litium-ion battery charger
Package Included:
- documentation
- 4D Pi Adapter Shield
- 5 way ribbon cable (Not A Programming Cable)
- header strips
- display module
Additional information:
- Gross weight: 0.25 kg
For a detailed listing of the capabilities of the display module in this Raspberry Pi Pack, please refer to the datasheet for the display itself, available from the Product Page of the uLCD-32PTU.
Downloads:
For more information about each component included in this package, please checkout individual items by clicking on their links below.
You must be logged in to post a review.
Related products
Arduino MEGA 2560 R3 (ATMEGA2560-16AU MCU)
Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Arduino Pro Mini Atmega168 (3.3V/ 8MHz, 5V/16MHz)
Features:
- 14 Digital input / output ports RX, TX D13, D12
- 8 analog input port A0 to A7
- The TTL level serial transceiver port RX / TX
- 4.6 PWM ports, D3,, D5 , D6, D9, D10, D11
- Using Atmel Atmega168P microcontroller
- Supports serial download (TTL)
- Support for external 5V ~ 12V DC power supply
- Support 9V battery-powered
- clock frequency 16MHz
Package includes:
-
1x Arduino Pro mini Atmega168 module board
- 3x header pin rows
Arduino UNO R3 with USB cable (ATMEGA 328P)
Specifications:
GLT240128-WB (LCD Graphic RS 232 BLU/WHT)
Raspberry Pi Compute Module 3 – 4Gbytes eMMC Flash
Raspberry Pi Calculation Module 3
Raspberry Compute Module 3 is for designers who prefer Raspberry Pi3 functionality but require a smaller form factor (67.6 mm X 31 mm) for their embedded design. These modules are DDR2-SODIMM, mechanically compatible system-on-a-chip (SoM) that includes a BCM2837 processor system-on-a-chip (SoC) with 1 GB of LPDDR2 RAM and 4 GB of eMMC flash. In addition, these modules have an additional input/output (I/O) interface in addition to the Raspberry Pi Model A/B board.
WiFly RN-171
- Ultra low power for battery powered applications
- Firmware configurable transmit power: 0dBm to +12dBm
- Hardware interfaces: UART
- Supports Adhoc and infrastructure networking modes
- User programmable GPIO & ADCs
- Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
- Run directly from batteries or regulated power supplies
- Configuration over serial or wireless interface using simple ASCII commands
- Over the air firmware upgrade
- Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
- Full onboard TCP/IP stack (no external drivers required)
Reviews
There are no reviews yet.