You must be logged in to post a review.
US-015 (Ultrasonic Distance Sensor Module)
US-015 Ultrasonic ranging module is capable of the 2cm ~ 4m non-contact distance measuring function, contrast to the HC-SR04 Ultrasonic Ranging Sensor , this module has a larger measure range. the supply voltage is 5V, The static power consumption is less than 3mA. This module supports the GPIO Communication mode, which is stable and reliable with the watchdog.
Specification:
- Working Voltage: 5VDC
- Output Signal: Electric frequency signal, high level 5V, low level 0V.
- Working Temperature : 0-70C
- Static Current: Less than 3mA
- Sensor angle: Not more than 15 degrees.
- Detection distance: 2cm~400cm.
- Precision: 0.3cm + 1%
- Mode of connection: VCC / trig(T) / echo(R) / GND
Categories: Sensor Modules, Ultrasonic Sensors
Related products
AMG8834
Temperature Sensor Digital, Infrared (IR) 14-SMD Module
Product Specifications
Sensor type | Infrared array sensor | |
Maximum output current | 10mA | |
Sensing distance | 7m | |
Switch mode | digital | |
Installation type | Surface mount | |
Number of pins | 14 | |
Maximum supply current | 4.5 mA | |
size | 11.6 x 8 x 4.3mm | |
height | 4.3mm | |
length | 11.6mm | |
series | Grid-EYE | |
Maximum working temperature | +80 °C | |
Maximum operating supply voltage | 5 V DC | |
Minimum operating temperature | -20 °C | |
width | 8mm |
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
MAX6675-(Temperature Sensor With Thermocouple Cable)
MAX6675 Module + K Type Thermocouple Sensor:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to +700°C.Motion Detecting Module- Zilog ePIR
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive infrared (PIR) sensor, which is shielded by a Fresnel lens. Taking advantage of the processing capabilities of the Z8 MCU, the ePIR uses a powerful new statistical processing method to provide exceptional motion detection performance.
MQ-6 LPG Gas Sensor Module
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 300 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
TCS34725 (RGB Color Sensor with IR filter and White LED)
OVERVIEW:1. Red, Green, Blue (RGB), and White Light Sensing with IR Blocking Filter
2. Programmable Analog Gain and Integration Time
3. 3,800,000:1 Dynamic Range
4. Very High Sensitivity: Ideally Suited for Operation Behind Dark Glass
5. Maskable Interrupt
6. Programmable Upper and Lower Thresholds with Persistence Filter
7. Power Management
8. Low Power: 2.5-uA Sleep State
9. 65-uA Wait State with Programmable Wait State Time from 2.4 ms to > 7 Seconds
10. I2C Fast Mode Compatible Interface
11. Data Rates up to 400 kbit/s
12. Input Voltage Levels Compatible with VDD or 1.8 V Bus
13. Register Set and Pin Compatible with the TCS3x71 Series
14. Small 2 mm*2.4 mm Dual Flat No-Lead (FN)
TTP224 (4 Channel Digital Capacitive Touch Sensor Button Switch Module For Arduino)
TTP229-LSF (Capacitive Touch Keypad Module)
Features:
- On board 8 capacitive touch keys and 1 linear capacitive sensor
- Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
- The system recalibrates automatically when all keys are not detected touch more than about 4 seconds
- Customizable functions:
- 8 keys or 16 keys option
- 8 individual outputs or batch production
- Single-key or multi-kye feature
- Sampling rate and duration of sampling in sleep mode
- The maximum key is on time
Reviews
There are no reviews yet.