UVM-30A (Ultraviolet Ray Sensor Detection Module)
Feature:
Working voltage: DC 3-5 v
Output voltage: DC 0-1 v
Test accuracy: + / – 1uv INDEX
Working current: Typical values 0.06 mA, The maximum 0.1 mA
Response wavelength: 200 nm to 370 nm
Work stability: – 20 ℃ ~ +85 ℃
Application:
UV tester, UV index instrument, outdoor UV monitoring equipment, sterilization lamp, flame detection
Characteristics:
- Operating voltage : DC 3-5V
- Output voltage : DC 0-1V
- Test accuracy : ± 1uV INDEX
- Operating Current: 0.06mA max 0.1mA typ
- Response Wavelength : 200nm-370nm
- job stability : -20 ° ~ +85 °
- designed for applications requiring high reliability and precision measuring UV Index (UVI) designed for the occasion ;
- suitable for measuring the amount of UV intensity of sunlight ;
- control World Health Organization classification standard UV Index
- UV detection wavelength :200-370nm;
- fast response , full interchangeability ;
- Using a patented solid polymer structure , waterproof and dustproof easy to clean ;
- linear voltage signal output ;
- small size , suitable for mobile phones and other portable products.
- A long size : 28mm X 12mm X height 10mm width
Application: UV tester, UV index meter, outdoor UV monitoring device, germicidal lamp equipment, fire detection
You must be logged in to post a review.
Related products
CJ1WTS562 (Temperature Sensor Module Screw Terminal Connection)
Highlights/Features:
Omron Temperature sensor module is suitable for use with cj1 series programmer controllers These temperature sensor units are classified as digital I/O units when considering I/O allocations and will take digital I/O points from the total allocation for a CJ1M CPU. The number of I/O points is DIP switch selectable as follows; configured for 1 - 3 inputs takes 48 digital I/O points, configured for 4 inputs takes 64 digital I/O points and configured for 5 - 6 inputs takes 96 digital I/O points.
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
Motion Detecting Module- Zilog ePIR
MQ-5 (Gas Sensor module LPG, Natural Gas, Coal Gas)
Overview
- Sensitive for LPG, natural gas, coal gas
- An increase in the output voltage along with the concentration of the measured gases
- Rapid reaction and recovery
- Adjustable sensitivity
- Output indicator
Gas Sensor type |
Sensitive gas |
Application |
| MQ-135 Gas Sensor | Benzene, alcohol, smoke | Air Quality Monitoring |
| MQ-2 gas sensor | HBO, propane, hydrogen | Gas leak detector |
| MQ-3 gas sensor | Alcohol, ethanol | Carbon alcohol, Breathalyzer |
| MQ-5 Gas Sensor | CIS, natural gas, coal gas | Gas leak detector |
| MQ-7 gas sensor | Carbon monoxide | Carbon Monoxide Monitor |
MQ-6 LPG Gas Sensor Module
MQ-8 (Hydrogen Gas Sensor Module)
MQ-8 Sensor Information: sensitive material MQ- 8 gas sensors used in clean air, low conductivity tin oxide (SnO2). When there is an environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Use simple circuit can convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity monitoring of other hydrogen-containing gas is also very good. The sensor can detect a variety of hydrogen-containing gas, in particular, city gas, is a low-cost sensor suitable for a variety of applications.
SHT31 (Digital Temperature and Humidity Sensor Module)
- Highly reliable, accurate and quick response time
- I2C interface
- Well calibrated, linearized, compensated for digital output
- Highly abstracted development library
- Input voltage (VCC): 3.3 volts or 5 volts
- I/O Logic Level : 3.3 volts or 5 volts based on VCC
- Operating Current : 100 μA
- Operating Temperature : -40–125 ℃
- Temperature Sensor Range : -40–125 ℃, with ±0.3°C accuracy
- Humidity Sensor Range : 0% - 100%(Relative Humidity), with ±2% accuracy
- Sensor Chip : SHT31
- I2C
T000220 (Arduino TinkerKit Touch Sensor Module)
- Based on a QT 100A single touch controller
- On-board-signal amplifier
- Green LED for correct power indication
- Yellow LED whose brightness depends on the values output by the module
Reviews
There are no reviews yet.