Showing 121–132 of 754 results

BA4558N

Operational Amplifiers - Op Amps OP-AMP DUAL

Applications:

Active filters Audio amplifiers VCOs Other electronic circuits

Features:

1) Low power dissipation of approximately 50mW (typ.). 2) Built-in output short-circuit protection circuit. 3) Internal phase compensation. 4) No latch-up. 5) Wide range of common mode and differential voltage. 6) High gain and low noise.

Banana Pi BPI-M2 Ultra

Key Features

  • Quad Core ARM Cortex A7 CPU. R40.
  • 2GB DDR3 SDRAM.
  • 8 GB eMMC storage.
  • WiFi (AP6212) & Bluetooth onboard.
  • SATA Interface.

Banana pi BPI-M2 Zero (Quad Core Single-Board Computer)

Banana PI BPI-M2 Zero is the open source hardware platform,Banana PI BPI-M2 Zero is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H2+ chip on board. and mini size only 60mm*30mm, all ineter face same as Raspberry pi Zero W.

Banana Pi BPI-M2 Zero series run Android,Debian linux,Ubuntu linux, Raspberry Pi image and others image. Banana PI PBI-M2 Zero hardware: 1Ghz ARM7 quad-core processor, 512M DDR3 SDRAM,and SDIO wifi&BT module on board.

Banana pi BPI-M2 Zero all size is same as Raspberry pi Zero W.

Banana Pi BPI-M64

Banana PI BPI-M64 is the open source hardware platform, Banana PI BPI-M64 is a quad-core 64 bit version of Banana Pi,use Allwinner A64 and Allwinner R18 chip design, it support WIFI+BT on board.

Banana Pi BPI-M64 series run Android, Debian linux, Ubuntu linux,Raspbian image and other OS. Banana PI PBI-M64 hardware: 64 Bit Quad Core ARM Cortex A53 1.2 Ghz CPU, 2GB DDR3 SDRAM, 8G eMMC flash on board.

Key Features:

- 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor.
- 2GB DDR3 SDRAM with 733MHz.
-  8 GB eMMC storage (16,32,64 options available).
-  WiFi (AP6212) & Bluetooth onboard.

Banana Pi BPI-R1(Open source routing development board 4-channel Gigabit Ethernet dual core system)

The banana pi BPI-R1 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for smart home networking use. With 2T2R MIMO Technology and two detachable antennas.

the BPI-R1 is the dual core Android 4.4 product which more better than Linux product. It can run with Android 4.4 smoothly and with 5 Gigabit ethernet port, SATA Socket.also support Linux OS, and Openwrt os.

it can easily run with the game and support 1080P high definition video output.

Banana Pi G1 Open Debugger Burner Board

BPI-G1 is an integrated IEEE802.11 b / g / n (WIFI wireless network), IEEE802.15.4 (Zigbee), IEEE 802.11-2007 Standard (Bluetooth Low Energy4.0) development board.It is very easy to put these wireless protocols seamlessly together, you can exchange any different transport protocols, and three kinds of wireless protocols are integrated by three single-chip SOC, you can easily create your own Internet of things (IoT).

Banana Pi M1 BPI-M1 A20 dual-core Open Source Development Board

Banana PI is an open source platform that was created to run open source elastos.org OS among others. Banana Pi 2 core, Android 4.2 product, which is much better than Raspberry Pi.

Equipment Banana Pi runs on Android, Debian Linux, Ubuntu Linux, openseuse Linux and images that run on Raspberry Pi and cubiedard.

Banana Pi has a gigabit Ethernet port and a SATA socket. It can work with Android 4.2.2 smoothly. Size Banana Pi M1 is about the same size as the credit card. it can easily run the game, since it supports 1080 P High Definition video output. GPIO is compatible with Raspberry Pi and can manage Raspberry Pi images directly.

Banana Pi M3 A83T Octa-core

The Banana PI BPI-M3 is an 8-core high-performance single-board computer. The Banana PI BPI-M3 is an eight-core Android 5.1 product that is more powerful than the Raspberry Pi. Banana PI BPI-M3 is highly compatible and can run Android, Debian linux, Ubuntu linux, Raspberry Pi and cubieboard systems. Banana PI BPI-M3 hardware: 1Ghz ARM7 8-core processor, 2GB LPDDR3 memory, Gigabit Ethernet port, 2 USB interface running Android5.1 smoothly. Banana PI BPI-M3 is the same size as the BPI-M1+, but the interface is different. It is easy to run the game "Quake III: Arena", support 2K HD video output, GPIO compatible with Raspberry PiB+ and can run Its ROM Image.

Banana PI plus BPI-M1+ (Dual core single-board computer)

Banana Pi BPi-M1 + contains the following changes to the previous Banana Pi 1GB RAM (Banana Pi M1):
  • 40 pole GPIO connector instead of 26 poles
  • micro SD card slot replaced the previous SD slot
  • motherboard integrated wifi adapter 802.11 b / g / n standard
  • processor and memory mounted on top of the panel for better cooling
  • composite video and stereo audio outputs are output on a 3.5mm 3.5-pin 4-pin jack

Banana Pi R2 Router board (BPI-R2)

The Banana Pi R2 development board is an extremely powerful multimedia network router that can be used for high-end wireless performance, home entertainment and home automation. The BPI-R2 seamlessly supports operating systems such as Android, Debian, Ubuntu and Bananian and features both a powerful MediaTek MT7623N quad-core ARM Cortex-A7 processor and a Mali 450 MP4 GPU. Additional features include USB 3.0 and SATA III as well as Mini PCIe and 8-GB eMMC on-board storage.

Barcode Scanner Engine Module (KY-E1005)

Original price was: ₨4,000.00.Current price is: ₨3,500.00.
YK-E1005 1D CCD Barcode Scanner embedded Scan Engine module