Showing 589–600 of 754 results

Sharp IR Long Range Sensor – 20 cm to 150 cm

  • Infrared range finder 20cm(~8") to 150cm (~60")
  • Analog interface
Read the distance of the object in front of your robot. The Sharp GP2Y0A02YK0F IR Range Sensor - 20 cm to 150 cm takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 20cm (~8") to 150cm (~60"). The interface is 3-wire with power, ground and the output voltage and requires a JST 3-pin connector (RB-Lyn-164).

SHT31 (Digital Temperature and Humidity Sensor Module)

General Features: 
  • Highly reliable, accurate and quick response time
  • I2C interface
  • Well calibrated, linearized, compensated for digital output
  • Highly abstracted development library
Specification: 
  • Input voltage (VCC): 3.3 volts or 5 volts
  • I/O Logic Level : 3.3 volts or 5 volts based on VCC
  • Operating Current : 100 μA
  • Operating Temperature : -40–125 ℃
  • Temperature Sensor Range : -40–125 ℃, with ±0.3°C accuracy
  • Humidity Sensor Range : 0% - 100%(Relative Humidity), with ±2% accuracy
  • Sensor Chip : SHT31
  • I2C
  

SI1145 (Digital UV Index / IR / Visible Light Sensor)

Features:
  • Features SI1145 Chipset
  • Digital i2c Sensor, with Level shifting for 3V & 5V Microcontrollers.
  • Works with the Raspberry Pi & Arduino
  • Senses Visible, IR & UV Light
  • Basic Proximity Sensing - Just connect an IR LED to the LED pin
  • IR Sensor Spectrum: Wavelength: 550nm-1000nm (centered on 800nm)
  • Visible Light Sensor Spectrum: Wavelength: 400nm-800nm (centered on 530nm)
  • Voltage Supply: Power with 3-5VDC
  • Output Type: I2C address 0x60 (7-bit)
  • Operating Temperature: -40°C ~ 85°C

SIM900 GPRS/GSM Arduino Shield Development Board (Quad Band)

 The GPRS Shield is based on SIM900 module from SIMCOM. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands ( GSM 07.07 , 07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (they are all 2.8V logic) present on-board.

Simcom- SIM900

With a tiny configuration of 24mm x 24mm x 3mm, SIM900 can meet almost all the space requirements in your applications, such as M2M, smart phone, PDA and other mobile devices. The keypad and SPI display interface will give you the flexibility to develop customized applications. Serial port and Debug port can help you easily develop your applications. One audio channel includes a microphone input and a speaker output.

SIMCom- SIM900-DS

SIMCOM SIM900-DS

(Ask for A Quotation)
* Control via AT commands* SIM Card Interfaces (Dual Standby)* Support Voice and SMS

SN04-N (Inductive Proximity Sensor, NPN, wires NO, 6-36V DC, 18x18x36mm)

Inductive Proximity Sensor,SN04-N,NPN,3-wire NO,6-36V DC 18*18*36mm

  1.  Part numer: SN04-N
  2.  Induction distance: 4mm
  3. Working voltage: DC 6-36V
  4.  Size: 18*18*36mm
  5. Output: NPN DC three wire normally open

 

SP2000MQMJ

(Ask For A Quote)Hammond Power SolutionsGeneral Purpose Transformers, HPS Spartan SeriesItem# SP2000MQMJ
HPS Spartan, 2kVA, 1PH, Open, Pri 240x480, Sec 120x240, 6.38"Hx5.31"Wx5.87"D

SPC56EL70

The SPC56EL70 series of MCUs from STMicroelectronics are sophisticated 32-bit systems-onchip with a dual-core e200z4d Power Architecture® CPU, and are aimed at safety-critical automotive applications.

ST-LINK V2 STM8/STM32 emulator programmer stlink downloader line burner debugger

850.00

Introduction: 

  • STM32 downloader ST-Link V2 emulator STM8 programmer automatically upgrade 3.3V 5V universal.
  • Mini ST-LINK / V2, the function is exactly the same as the official, supports automatic upgrade, supports the full range of STM32 SWD and the full range of STM8 SWIM download and debugging.