Showing 685–696 of 773 results

TMP006 (Contact-less Infrared Temperature Measurement)

The TMP006 works with 3v to 5v, so it can be used with most microcontrollers without the need for a level shifter. It connects via the i2c bus and is addressable so you can have up to 8 TMP006 sensors on the same bus.

Features:

  •     20mm x 20mm (board w/o headers)
  •     Uses I2C 7-bit addresses between 0x40 and 0x47, selectable with jumpers
  •     Interface Type : I2C Arduino driver module

TQFP44 to DIP40 Adpater for AVR ISP Interface IC adapter Programmer Socket- CNV-QFP-MPU51

Original price was: ₨3,000.00.Current price is: ₨2,500.00.
  • Top Quality LQFP44 TQFP44 to DIP40 adapter
  • QFP44 Adpater Test block for AVR ISP Interface IC adapter Programmer socket

TSL 2561 (Light sensor Evaluation Board)

TSL2561 - Light, Ambient Sensor Evaluation Board Approximates Human eye Response Precisely Measures Illuminance in Diverse Lighting Conditions Temperature range: -30 to 80 *C Dynamic range (Lux): 0.1 to 40,000 Lux Voltage range: 2.7-3.6V Interface: I2C This board/chip uses I2C 7-bit addresses 0x39, 0x29, 0x49, selectable with jumpers

TSL2581FN (Ambient Light Sensor-Street Light Control Sunlight)

General Features:

  • Features TSL2581FN with ADC, feels the ambient light just like human vision
  • I2C interface directly outputs the ambient light intensity value, needs no calibration, less noise interference
  • Embedded infrared photodiode, gets high precision output even in environments with strong infrared noise interference
  • Features interrupt output, programmable upper/lower thresholds
  • Sensitivity is about 30 times higher than TSL2560/TSL2561
  • Embedded voltage level translate circuit, allows directly connecting to 3.3V/5V MCU systems

TSOP1838

FEATURES:
  • Photo detector and preamplifier in one package
  • Internal filter for PCM frequency
  • TTL and CMOS compatibility
  • Output active low
  • Improved shielding against electrical field disturbance
  • Suitable burst length ā‰„6 cycles/burst 

TTP 223B (Touch Thumb Sensor Module)

Product description:

This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223 touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen.This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Even isolated by some cloth and paper, it still can feel the touch. And the sensitivity well decrease as isolation get thick.

TTP224 (4 Channel Digital Capacitive Touch Sensor Button Switch Module For Arduino)

Feature:

With 4 board-level status indicator POB board size: 35 x 35mm (1.38 x 1.38 inch) L / W Operating voltage: 2.4V~5.5V Modes optional: Output Mode, Key Output Mode, The Maximum Output Time Mode and Fast Output/Low Power Mode Weight: 7g

TTP226 (8-Channel Digital Capacitive Switch Touch Sensor Module)

Description:       1. On-board TTP226 capacitive 8 keys touch sensor IC      2. On-board 8 channel level status indicator     3. Working voltage: 2.4V-5.5V     4. The module can set the output mode, the key output mode, the maximum output time and fast / low power selection     5. PCB board size: 47.5 (mm) x46 (mm)     

TTP229-LSF (Capacitive Touch Keypad Module)

Features:

  • On board 8 capacitive touch keys and 1 linear capacitive sensor
  • Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
  • The system recalibrates automatically when all keys are not detected touch more than about 4 seconds
  • Customizable functions:
    • 8 keys or 16 keys option
    • 8 individual outputs or batch production
    • Single-key or multi-kye feature
    • Sampling rate and duration of sampling in sleep mode
    • The maximum key is on time

TurtleBot 3 Burger

TurtleBot is a low-cost, personal robot kit with open-source software. TurtleBot was created at Willow Garage by Melonee Wise and Tully Foote in November 2010. With TurtleBot, youā€™ll be able to build a robot that can drive around your house, see in 3D, and have enough horsepower to create exciting applications.  

U-BLOX NEO-6M module (GY-GPS6MV2)

This GPS is a very capable GPS for the price and size. Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432. Power the module and it will automatically acquire satellite signals and a position fix. Once it has a position fix the module will blink the on board LED. This LED will continue to blink while the module has a position fix. The Product contains the following parts;
  • 1 ā€” u-blox NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
  • 1 ā€” GPS antenna
  • 1 ā€” 1x4 male header

uLCD-32PTU-Pi (3.2″ Raspberry Pi Display Module for the Raspberry Pi A, B and B+)

Manufacturer 4D Systems
Type of display TFT
Screen size 3.2"
Display resolution 240x320
Supply voltage 5V DC
Contrast 450:1
Luminosity 250cd/m2
No. of colours 65k
Window dimensions (H x W) 48.6 x 64.8mm
Dimensions 56.32 x 92.19 x 15.9mm
Kind of display graphical
Microcontroller PICASO
Series Raspberry Pi
Viewing angle 150Ā°