Shop
W005M
Features:
* High reverse voltage to 1000V * Surge overload ratings to 50 amperes peak * Good for printed circuit board assembly * Mounting position: Any * Weight: 1.20 gramsMechanical Data:
Case: Molded plastic Lead: Solder plated Polarity: As marked Weight: 1.10 gramsLead: MIL-STD-202E, Method 208 guaranteed
W1209(Digital Thermostat)
W1209 TEMPERATURE CONTROL SWITCH
Technical Specifications:
• Input voltage: DC 12V • Static current: ≤35MA, attract current ≤65MA • Output power: 10A relay • Measurement input: NTC (10K 0.5%) waterproof sensor • Environmental requirements: -10℃ ~ +60℃ , Humidity 20% ~ 85% • Temperature control mode: ON / OFF • Temperature range: -50℃ ~ +110°C • Control accuracy: 0.1°C • Hysteresis accuracy: 0.1°C • Refresh rate: 0.5S • High temperature protection: 0 ~ 110°C • Resolution: 0.1℃ when -9.9℃ - 99.9℃, other range 1°C Size : 1.9" x 1.6" x 0.6"
WaveShare DVK600 FPGA CPLD Expansion Board
White/RED/Yellow/Orange (3mm)
Green LED in standard 3mm package.
Green diffused package.
Luminous intensity 15mcd max at IF = 20mA.
The cathode is the short lead.Specifications
- Luminous Intensity: 10 - 15 mcd
- Viewing Angle: 60 Deg.
- Dominant Wavelength: 570 nm
- Spectrum Radiation Bandwidth: 25 nm
- Forward Voltage: 1.8 - 2.6V
- Recommended Working Current: 20 mA (at 2.2V)
White/RED/Yellow/Orange (5mm)
WiFly RN-171
Features:
- Ultra low power for battery powered applications
- Firmware configurable transmit power: 0dBm to +12dBm
- Hardware interfaces: UART
- Supports Adhoc and infrastructure networking modes
- User programmable GPIO & ADCs
- Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
- Run directly from batteries or regulated power supplies
- Configuration over serial or wireless interface using simple ASCII commands
- Over the air firmware upgrade
- Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
- Full onboard TCP/IP stack (no external drivers required)
Winsen ZH03A (Laser Dust particle Sensor Module)
Wireless Mobile Charger-Duracell Powermat for 2 Devices (PMA Compatible)-Black
Introduction:
(*********Clearance Sale*********)
- Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
- Country/Region of Manufacture: China
- Connectivity: Wireless
- Compatible Model: Kyocera Duraforce Pro, Universal
- Features: Wireless Charging
- Model: PowerMat
- Wireless Charging Standard: PMA compatible only (not compatible with Qi)
- Type: Charging Mat
- Compatible Brand: Universal, For Kyocera
WizFi220 (WiFi)
WizFi220 is a Wi-Fi module that provides the robust and stable Wi-Fi connectivity. WizFi220 performs all functions for Wi-Fi connectivity and TCP/IP processing. All you have to do is just sending commands to the module via serial interface.WizFi220 is all compatible with WizFi210 in hardware & software, but it has the external power amplifier for the longer communication.
WizFi250 (WiFi)
XBee 1mW Wire Antenna
Description:
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
XBee 1mW Wire Antenna
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.