Shop
ARDUINO A000073 (UNO SMD REV3, ATmega328 MCU)
Arduino DUE R3 Board SAM3X8E 32-bit Cortex-M3 Control Board Module
Overview:
Arduino Due Microcontroller Board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button
Arduino Ethernet Shield w/o PoE (Wiznet W5100)
(Get A latest Price)
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a standard RJ45 Ethernet jack using the shield.
ARDUINO GEMMA WearAble ATtiny85 Board
Arduino Leonardo, ATmega32U4, USB
Specifications
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended)
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega32u4) of which 4 KB is used for the bootloader
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- Clock Speed: 16 MHz
Arduino M0 Pro – ATSAMD21G18 Controller
The Arduino M0 Pro is an Arduino M0 with a step-by-step debugger
Specification：
- 1.Micro Controller：ATSAMD21G18,48pins LQFP
- 2.Working Voltage：3.3V
- 3.Digtal I/O Pin：14,12 Piece PWM and UART
- 4.Analog Input Pin：6,12-status ADC channels
- 5.Analog Output Pin：1,10-status DAC
- 6.Each I/O Pin's Direct Current：7 mA
- 7.Flash Memory：256 KB
- 8.SRAM：32 KB
- 9.EEPROM：Through Simulation Highest is 16KB
- 10.Clock Spead：48 MHz
- 11.L*W：2.7*2.1 inches
- 12.External Power：5V1A~2A
- 13.Weight:70g
Arduino MEGA 2560 R3 (ATMEGA2560-16AU MCU)
Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Arduino Multifunctional Expansion Board (Basic Learning Kit/Microcontroller Development Board)
Product Introduction:
- 4 digit 7-segment LED display module driven by two serial 74HC595's
- 4 x surface mount LED's in a parallel configuration
- 10K adjustable precision potentiometer
- 3 x Independent push buttons
- Piezo buzzer
- DS18B20 temperature sensor interface
- LM35 temperature sensor interface
- Infrared receiver interface
- Serial interface header for convenient connection to serial modules such as Bluetooth, wireless interface, voice module, a voice recognition module etc.
Arduino Nano V3.0 CH340 Improved Atmega328P USB to TTL with USB cable
Overview:
- Microcontroller: Atmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory:32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM:2 KB (ATmega328)
- EEPROM:1 KB (ATmega328)
- Clock Speed:16 MHz
Arduino Pro Mini – 3.3V/8MHz, 5V/16MHz (ATMEGA328)
Features:
• ATmega328 running at 8MHz with external resonator (0.5% tolerance) • Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc) • USB connection off board • Supports auto-reset • 3.3V regulator • Reverse polarity protected • DC input 3.3V up to 12V • On board Power and Status LEDs
Arduino Pro Mini Atmega168 (3.3V/ 8MHz, 5V/16MHz)
Features:
- 14 Digital input / output ports RX, TX D13, D12
- 8 analog input port A0 to A7
- The TTL level serial transceiver port RX / TX
- 4.6 PWM ports, D3,, D5 , D6, D9, D10, D11
- Using Atmel Atmega168P microcontroller
- Supports serial download (TTL)
- Support for external 5V ~ 12V DC power supply
- Support 9V battery-powered
- clock frequency 16MHz
Package includes:
- 1x Arduino Pro mini Atmega168 module board
- 3x header pin rows
Arduino Shield RAMPS-FD for Arduino Due 3D printer controller
When you use Arduino Due as the controller of your 3D Printer, you may find the RAMPS1.4 is not compatible with DUE.As you know the Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3, the importance is the Atmel SAM3X8E chip used on the Due operates at 3.3V,worse applying 5V to the Due's inputs will likely damage the chip.So we create a new RAMPS variant which is compatible with the Due to replace Ramps 1.4.